Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Dienes stereoregular

Stereospecific polymerization of substituted conjugated dienes. Stereoregular polytactic polymers have been obtained from a number of substituted dienes, including one optically active 1,3-substituted propadiene, and various 1- or 1,4-substituted butadienes. (R)-penta-2,3-diene has been polymerized by means of 7T-allyl-Ni-iodide to an optically active polymer, to which an interesting stereoregular structure has been attributed (Scheme 26) (224). Some of the stereoregular polymers... [Pg.56]

The bifunctionality of the bis-diene and bis-dienophile monomers is apparent from the condensation product, structure [XXI], which still contains a diene and a dienophile in the same molecule. This polymer is crystalline, indicating a high degree of stereoregularity in the condensed rings. It decomposes to a graphitic material before melting. [Pg.338]

The primary use of TiCl is as a catalyst for the polymerisa tion of hydrocarbons (125—129). In particular, the Ziegler-Natta catalysts used to produce stereoregular polymers of several olefins and dienes, eg, polypropylene, are based on a-TiCl and A1(C2H3)3. The mechanism of this reaction has been described (130). SuppHers of titanium trichloride iaclude Akso America and Phillips Petroleum ia the United States, and Mitsubishi ia Japan. [Pg.130]

In 1992/1994, Grubbs et al. [29] and MacDiarmid et al. [30] described an improved precursor route to high molecular weight, structurally regular PPP 1, by transition metal-catalyzed polymerization, of the cyclohexa-1,3-diene derivative 14 to a stereoregular precursor polymer 16. The final step of the reaction sequence is the thermal, acid-catalyzed elimination of acetic acid, to convert 16 into PPP 1. They obtained unsupported PPP films of a definite structure, which were, however, badly contaminated with large amounts of polyphosphoric acid. [Pg.172]

During the last two decades, a number of diene homopolymers and copolymers have been developed to fill the diverse elastomer needs in the production of tires. The earliest developments were mainly concerned with the preparation of stereoregular cis-1,4-polyisoprene, as a substitute for natural rubber, using... [Pg.73]

Double bonds present along a polymer chain are stereoisomeric centers, which may have a cis or trans configuration. Polymers of 1,3-dienes with 1,4 additions of the monomeric units contain double bonds along the chains and may contain up to two stereoisomeric tetrahedral centers. Stereoregular polymers can be cis or trans tactic, isotactic or syndiotactic, and diisotactic or disyndio-tactic if two stereoisomeric tetrahedral centers are present. In the latter case erythro and threo structures are defined depending on the relative configurations of two chiral carbon atoms.1... [Pg.94]

In the early 1950s Karl Ziegler in Germany and Giulio Natta in Italy found catalysts that polymerized olefins and dienes with stereoregularity and with mild polymerization conditions. For this revolutionary discovery they both won the Nobel Prize. Let us take the example of propylene, which we... [Pg.253]

Mechanisms have been proposed to explain stereoselectivity in 1,3-diene polymerizations, but these processes are less understood than the polymerization of ethylene and 1-alkenes [Peluso et al., 1997]. The ability to obtain cis 1,4-, trans 1,4-, and st 1,2-polymers from 1,3-butadiene, each in very high stereoregularity, hy using different initiators has great practical utility for polymer synthesis even if it is not well understood why a particular initiator gives a particular stereoregular polymer. [Pg.694]

Figure 1 summarizes the chemical structures of the topochemically polymerizable 1,3-diene monomers providing stereoregular 1,4-trans polymer (Scheme 6) [ 16]. Most of the polymerizable monomers contain benzyl, naphthylmethyl, and long alkyl-chain substituents in their chemical structures. The (ZyZ)-, (E,Z)-, and ( , )-muconic and sorbic acids as well as the other diene carboxylic acids are used as the ester, amide, and ammonium derivatives. In contrast to this, the carboxylic acids themselves have crystal structures unfavorable for polymerization while they undergo [2-1-2] photodimerization, as has already been described in the preceding sections. Figure 1 summarizes the chemical structures of the topochemically polymerizable 1,3-diene monomers providing stereoregular 1,4-trans polymer (Scheme 6) [ 16]. Most of the polymerizable monomers contain benzyl, naphthylmethyl, and long alkyl-chain substituents in their chemical structures. The (ZyZ)-, (E,Z)-, and ( , )-muconic and sorbic acids as well as the other diene carboxylic acids are used as the ester, amide, and ammonium derivatives. In contrast to this, the carboxylic acids themselves have crystal structures unfavorable for polymerization while they undergo [2-1-2] photodimerization, as has already been described in the preceding sections.
The polymerization proceeds under photo- [49,50],X-ray [51], and y-ray [52] irradiation in the dark in vacuo, in air, or even in water or organic solvent as the dispersant (nonsolvent) for the crystals, similar to the solid-state polymerization of diacetylene compounds [ 12]. The process of topochemical polymerization of 1,3-diene monomers is also independent of the environment surrounding the crystals. Recently, the thermally induced topochemical polymerization of several monomers with a high decomposition and melting point was confirmed [53]. The polymer yield increases as the reaction temperature increases during the thermal polymerization. IR and NMR spectroscopies certified that the polymers obtained from the thermally induced polymerization in the dark have a stereoregular repeating structure identical to those of the photopolymers produced by UV or y-ray irradiation. [Pg.272]

Fig. 13 Stereoregular polymer sequences for trans-lA polymers obtained from 1,3-diene dicarboxylic acid derivatives... Fig. 13 Stereoregular polymer sequences for trans-lA polymers obtained from 1,3-diene dicarboxylic acid derivatives...
Stereospecific polymerization has particular significance for the preparation of stereoregular polymeric dienes. In the radical polymerization of butadiene or isoprene the molecular chains always consist of varying proportions of adjacent cis- and trans-1,4-units as well as 1,2- and 3,4- linked units, depending on the polymerization conditions but it is now possible, using particular ionic initiation systems to make a synthetic natural rubber that contains more than 90% cfs-l,4-isoprene repeating units (see Example 3-21). [Pg.194]

Stereoregular Polymerization of Dienes. Coordination polymerization exhibiting high degree of chemo- and stereoselectivity is the method of choice to synthe-size c -1,4-polybutadiene the commercially most important product (see... [Pg.765]

The influence exerted by the stereoregularity of the polymer on its optical activity was examined in the case of isotactic cis-1.4-polypenta-1.3-diene (V) (95) the optical activity increases with increasing stereoregularity up to a value of [M] 8 referred to the monomeric unit, of about 15.5 for contents of cis monomeric units of about 80%. [Pg.402]

The substituted carbon atoms in the polymer chain are asymmetric. Stereoregular polymers are produced if all these carbon atoms have the same configuiation (all d or all I) or if the d and 1 configurations occur alternately pronounced stereo-regularity is seldom achieved in radical polymerizations except perhaps at very low temperatures. When dienes are polymerized by a radical mechanism, the resulting polymers contain several distinct types of monomer unit, thus butadiene can give rise to -CH2 C(CH CH2)-, -CH CH CH CH2- cis, and -CH CH.CH CH2- trans. [Pg.1344]

The stereoregularity of polymers relates not only to the configuration of four substituents attached to saturated carbon atoms in the polymer chains but also to the geometric isomerism, resulting from the presence of unsaturated carbon atoms in the polymer chains. Such isomerism appears in chains of polymers formed in the 1,4 polymerisation of conjugated dienes [scheme (19)] and the polymerisation of acetylenes [scheme (20)] as well as the ring-opening polymerisation of cycloolefins [scheme (16)] ... [Pg.25]

Butenyllithium and butenylmagnesium chloride were used as "dynamic allylic compounds. The former was selected because of the ability of lithium catalysts to provide high rates of diene polymerization and to give stereoregular polymers the latter was selected for its availability and simplicity of synthesis. [Pg.268]


See other pages where Dienes stereoregular is mentioned: [Pg.677]    [Pg.677]    [Pg.357]    [Pg.353]    [Pg.107]    [Pg.76]    [Pg.91]    [Pg.196]    [Pg.59]    [Pg.704]    [Pg.263]    [Pg.264]    [Pg.292]    [Pg.6]    [Pg.668]    [Pg.308]    [Pg.175]    [Pg.3]    [Pg.4]    [Pg.280]    [Pg.281]    [Pg.281]    [Pg.282]    [Pg.290]    [Pg.307]    [Pg.307]    [Pg.310]    [Pg.312]    [Pg.312]    [Pg.315]    [Pg.319]    [Pg.126]    [Pg.141]   
See also in sourсe #XX -- [ Pg.765 ]




SEARCH



Diene rubbers stereoregular

Stereoregular Polymerization of Dienes

Stereoregularities

Stereoregularity

© 2024 chempedia.info