Ketone dicumyl

Keywords dicumyl ketone, photodecarbonylation, crystal-to-crystal reaction... 

Evidence suggesting a change in the mode of peroxide decomposition under conditions of rapid thermolysis is provided by the decomposition of dicumyl peroxide in mineral oil ). Thus, although the yield of cumyl alcohol is the same whether the decomposition occurs at 135 or 180 C, the yield of acetophenone and methane, the products of ketonic scission of the cumyloxy radical, essentially doubles at the higher temperature. 

Normosterol. See Pentaerythrityl tetraacetate Normuscone. See Cyclopentadecanone Norox Azox. See Acetylacetone peroxide Norox CHP. See Cumene hydroperoxide Norox DCP. See Dicumyl peroxide Norox DTBP. See Di-t-butyl peroxide Norox FS-100/9. See Methyl ethyl ketone peroxide... 

Table 20-1. Half-Lives and Activation Energies of Decomposition of Some Free Radical Initiators AI BN, Azobisisobutyronitrile BPO, Dibenzoyl Peroxide MEKP, Methyl Ethyl Ketone Peroxide IPP, Diisopropyl Peroxide Dicarbonate Dicup, Dicumyl Peroxide CuHP, Cumyl Hydroperoxide...

Acrylic esters and unsaturated polyesters are commercially cured with peroxides or peresters. The choice of per compound is determined on the basis of price, the achievable polymerization rate, and the side products formed. The polymerization rate is determined by the decomposition rate of the initiator, when mixed with the material to be cured, as well as on the free radical yield. In addition, attention should be paid to the fact that many per compounds decompose slowly during storage, thus reducing the polymerization activity per unit initiator mass. For this reason, crystalline per compounds are more stable because of the lower diffusion than amorphous or dissolved per compounds. Side products of initiator compounds can have an unfavorable effect on the long-term thermoset properties dibenzoyl peroxide, for example, forms acids dicumyl peroxide forms ketones. Acids can hydrolyze the ester bonds of polyester chains, causing scission, and ketones can... 

The exo-olefin is a precursor to a variety of chain-end-functionalized polymers via postpolymerization reaaions as shown in Scheme 37. Hydroxy-functionalized PIB has been utilized as a precursor for the preparation of RAFT macromo-lecular CTAs and carboxylic acid end-fimctionalized polymers. Telechelic PIB diols have been prepared using p-dicumyl chloride/BCU initiator system followed by dehydro-chlorination, hydroboration, and alkaline peroxide oxidation. Aldehyde end-fiinctionalized PIBs have been used to prepare carboxyl- and hydroxyl-terminated poly-mers. Carboxylic acid-functionalized PIBs have also been prepared from the oxidation of the methyl ketone-functionalized PIBs." The hydroxyl-functionalized PIBs have also been used to prepare methacrylate macromonomers by their reaction with methacryloyl chloride in the presence of triethylamine. The homopolymerization and copolymerization of these maaomonomers with methyl methacrylate were also reported. Cyanoacrylate-funaionalized PIBs prepared via the hydroxyl-functionalized PIB were also reported by Kennedy et al. ... 

The family of dialkyl peroxides includes dicumyl peroxide, which accounts for one-third of the volume of dialkyls world-wide and is the workhorse of this family of peroxides. Dicumyl peroxide is commonly used as a catalyst in polyester resin systans and for cross-linking polyethylene. Benzoyl peroxide is the most common of the diacyl peroxides. It is also used as a catalyst for curing polyester resins. Hydroperoxides are generally used as a raw material to produce other organic peroxides. The most common peroxides in this family include cumene hydroperoxide and t-butyl hydroperoxide. Ketone peroxides are mixtures of peroxides and hydroperoxides that are commonly used for room-temperature curing of polyester resins. Methyl ethyl ketone peroxide (MEKP) is the major product in this family. Peroxydicarbonates are largely used to initiate polymerization of polyvinyl chloride (PVC). 

---