2.8- dichloro-10,10-dibromo

Tellurate(IV) Dibromo-dichloro-diphenyl- El2b, 669 (R2TeX2 +... 

Dichloro and dibromo-compounds give a precipitate with the reagent and also liberate free iodine ... 

A similar study of the nitration of 2,5-dichloro- and 2,5-dibromo-nitrobenxene under a variety of conditions has been made. At the very high acidities in oleum the o /)-ratio for nitration was less than unity. It increased with decreasing acidity of the medium and became greater than unity at roughly the acidity represented by 89-90 % sulphuric acid. The results were interpreted in terms of the interaction between the nitronium ion and the nitro group, but the results are complicated and the interpretation not compelling. 

The best known of the hahdes are the trialkyldihalo- and triaryldihaloantimony compounds. The dichloro, dibromo, and diiodo compounds are generally prepared by direct halogenation of the corresponding tertiary stibiaes. The difluoro compounds are obtained by metathasis from the dichloro or dibromo compounds and silver fluoride. The diiodo compounds are the least stable and are difficult to obtain ia a pure state. The tri alkyl- and triaryldichloro- and dibromoantimony compounds are all crystalline soHds which are stable at room temperature that but decompose on heating ... 

Imidazolidinones. Several mono and dichloro isomers have been prepared and tested as disinfectants (157) 1-ch1oro-4,4,5,5-tetramethylimidazo1idin-2-one [58816-19-6] l,3-dichloro-4,4,5,5-tetramethylimidaZohdin-2-one [58816-20-9] (5), mp 102—104°C l-chloro-2,2,5,5-tetramethylimidazohdin-4-one [38951-95-8] mp 157—158°C and l,3-dichloro-2,2,5,5-tetramethylimidazohdin-4-one [128780-87-0] (6), mp 69—71°C (158). In water, these compounds are somewhat less stable but better disinfectants than the oxazoUdinones. They have potential for water disinfection and in hard surface cleaners. l-Bromo-3-chloro- [108602-19-3] mp 102—104°C, and 1,3-dibromo- [108602-18-2] mp 119—121°C, derivatives of 4,4,5,5-tetramethylimidazohdin-2-one have been prepared. 

Imidazole, 4,5-dibromo-l-methyl-synthesis, S, 399 Imidazole, 4,5-di-t-butyl-synthesis, S, 483 X-ray diffraction, S, 350 Imidazole, 4,5-dichloro-chlorination, S, 398 synthesis, S, 398, 473 Imidazole, 4-(3,4-dichlorophenyl)-nitration, 5, 433 Imidazole, 4,5-dicyano-hydrolysis, S, 435-436 synthesis, S, 461, 472, 487 Imidazole, 4,5-dicyano-1-vinyl-synthesis, S, 387 Imidazole, 4,5-dihydro-mass spectra, 5, 360 Imidazole, 4-(dihydroxybutyl)-synthesis, S, 484 Imidazole, 4,5-diiodo-nitration, S, 396 synthesis, S, 400 Imidazole, 2,4-diiodo-5-methyl-iodination, S, 400 Imidazole, 1,2-dimethyl-anions... 

Indole, 3-(dialkylaminomethyl-) alkylation, 4, 275 Indole, 2,3-dibromo-synthesis, 4, 215 Indole, 2,6-dibromo-3-methyl-synthesis, 4, 215 Indole, 1,3-dichloro-synthesis, 4, 214 Indole, dihydrodehydrogenation, 4, 283, 311 in non-silver photography, 1, 383 Indole, 2,3-dihydro-synthesis, 4, 327, 352 Indole, 2,3-dihydroxy-tautomerism, 4, 37, 199 Indole, 4,6-dimethoxy-... 

Purine, 2,6-dibromo-9- -D-ribofuranosyl-synthesis, 5, 594 Purine, 6,8-di-t-butyl-amination, 5, 542 Purine, 2,6-dichloro-alkylation, 5, 530 reactions... 

PCBs and PCTs are particularly troublesome liquids because of their toxicity and persistence in the environment. They are defined as polychlorinated biphenyls, polychlorinated terphenyls, monomethyl-dibromo-diphenyl metliane, monomethyl-dichloro-diphenyl metliane or monomethyl-tetrachlorodiphenyl methane. With low electrical conductivity and heat resistance they found wide use as dielectric fluids and were formerly used as hydraulic fluids. PCBs have not been made in the UK since 1977 and whilst most new uses for the substance are banned in most countries, around two-thirds of the 1.5 million tonnes manufactured in Europe and the US prior to 1985 still remain in equipment such as transformers. PCTs have been used in the past in a restricted range of specialist industrial applications. 

The only known reaction of a furan with a dihalocarbene is that recently reported between benzofuran and dichlorocarbene in hexane at 0°. The initial adduct (7) could not be isolated but on hydrolysis gave the ring-expanded product 8, possibly via 9, in 15% yield. Benzothiophene was recovered in 92% yield under the same conditions. 2,5-Dihydrofuran reacted with dichloro- and dibromo-carbene to give the products of allylic insertion, 2-dihalogenomethyl-2,5-dihydrofuran, as well as the normal addition products. ... 

Dichloro- and l,2-dibromo-l,2-dihydro-3-benzoxepins are dehalogenated with zinc in methanol to give 3-benzoxepin (6a) in excellent yield.93 A methoxycarbonyl group in the 2-position, however, diminishes the yield of 6b considerably.91... 

Benzoxepin undergoes addition of bromine and chlorine to give l,2-dibromo-l,2-dihydro-3-benzoxepin (2 a) and 1,2-dichloro-l, 2-dihydro-3-benzoxepin (2b), respectively.93 The bromination reaction of dimethyl 3-benzoxepin-2,4-dicarboxylate takes the same course to give 2c.91... 

Treatment with NCS in carbon tetrachloride converted the parent into the 2,3-dichloro derivative. The 2,3-dibromo compound was made similarly with NBS (74BSF2239), or with bromine in chloroform in the presence of sodium acetate (72CHE13). Monobromination is possible, but generally mixtures form with 2- and 3-bromo products in ratios of the order of 1 3 (72CHE13). It was possible to prepare 3-bromobenzo[h]sele-nophene by reaction of the 2,3-dibromo derivative with butyl lithium followed by hydrolysis. Four moles of bromine gave the 2,3,6-tribromo derivative from benzo[h]selenophene (74BSF2239). 

Dichloro-2,3(l//,4/7)-quinoxalinedione gave 2,3-dibromo-6,7-dichloroqumoxa-line (20) (PBrs, 155°C, until complete >90% analogs likewise). ... 

This iron-ate complex 19 is also able to catalyze the reduction of 4-nitroanisole to 4-methoxyaniline or Ullmann-type biaryl couplings of bis(2-bromophenyl) methylamines 31 at room temperature. In contrast, the corresponding bis(2-chlor-ophenyl)methylamines proved to be unreactive under these conditions. A shift to the dianion-type electron transfer(ET)-reagent [Me4Fe]Li2 afforded the biaryl as well with the dichloro substrates at room temperature, while the dibromo substrates proved to be reactive even at —78°C under these reaction conditions. This effect is attributed to the more negative oxidation potential of dianion-type [Me4Fe]Li2. 

Two wider ranging, more systematic investigations of conformational dependence have since been performed to establish whether the conformational sensitivity noted in the above PECD smdies may generally provide a means for identifying and distinguishing gas-phase structure of suitable chiral species. The B-spline method has been applied to the model system (l/f,2f )-l,2-dibromo-l,2-dichloro-l,2-difluoroethane [60]. Rotation around the C C bond creates three stable conformational possibilities for this molecule to adopt. The results for both core and valence shell ionizations reaffirm an earlier conclusion a and p are almost unaffected by the rotational conformation adopted, whereas the PECD varies significantly. Eor the C Ij ionization to show any sensitivity at aU to the relative disposition of the halogen atoms further reinforces the point made previously in connection with the core level PECD phenomenon. 

---