Developing agents film development

When the film is developed (the developer being a reducing agent), the unchanged silver bromide immediately surrounding these nuclei is reduced to give a visible blackening of the film. 

Photography. Sodium sulfite is useful as a reducing agent in certain photographic fixing baths, developers, hardeners, and intensifiers (334). However, the principal use is as a film preservative and discoloration preventative (see Photography). 

Lesser amounts of sodium thiocyanate are used in color toning photographic paper, as a stabilizer in rapid film development, and as a sensitizing agent in color negative-film emulsions. It is also used as a brightener in copper electroplating. 

The treated water contains sufficient concentration of surface film-forming agents if cold water spends about 12 min and warm water at least 20 min in the tank [19]. Sudden temperature variations over 10°C must be prevented because the active form of Al(OH)3 is sensitive to them [20]. If mixing with cold water or subsequent warming cannot be avoided, a short-term electrolytic aftertreatment must be provided in a small reaction tank. The development of undisturbed protective films in the tubing assumes continuous water flow with forced circulation by pumps [20]. 

The use of quenching agents in polymers is a recent development. Of particular interest are the nickel(II) chelates in polypropylene film and fibre and the even newer hindered amines which appear to combine the roles of antioxidant cmd quenching agent. 

To improve the resistance to ultraviolet light carbon black is often useful as a light screen. Its use in fibres and films is clearly very restricted and in these instances ultraviolet absorbers and/or quenching agents are used. Recent developments include the greater use of hindered amine and nickel compounds. 

Poly(vinyl alcohol) is employed for a variety of purposes. Film cast from aqueous alcohol solution is an important release agent in the manufacture of reinforced plastics. Incompletely hydrolysed grades have been developed for water-soluble packages for bath salts, bleaches, insecticides and disinfectants. Techniques for making tubular blown film, similar to that used with polyethylene, have been developed for this purpose. Moulded and extruded products which combine oil resistance with toughness and flexibility are produced in the United States but have never become popular in Europe. 

---