Separator program design

For the regression analysis of a mixture design of this type, the NOCONSTANT regression command in MINITAB was used. Because of the constraint that the sum of all components must equal unity, the resultant models are in the form of Scheffe polynomials(13), in which the constant term is included in the other coefficients. However, the calculation of correlation coefficients and F values given by MINITAB are not correct for this situation. Therefore, these values had to be calculated in a separate program. Again, the computer made these repetitive and Involved calculations easily. The correct equations are shown below (13) ... 

Just another approach is to calculate e.g. the temperature distribution within a separate program like ANSYS, figure 14, and to transfer the temperature induced index change to the 10 design. If the refractive index change due to the heater can be represented in a parametric model of a... 

ARINC 653 requires applications to be written as a number of separate programs (running in separate partitions), each of which run to completion each Major Frame. In the author s opinion, this is less intuitive than the Ada tasking model and can distort the software design. 

In computerized systems handling information for statistical purposes, adequate provision should be made in their design and programs for separating identities from the rest of the data. 

Washington Has separate programs and design guidelines for improvement and preservation projects... 

WA No WSDOT has separate programs and design guidelines for Improvement and Preservation projects. Within our preservation projects, we do have guidance that allows for spot safety improvements. 

---