Dense-phase fluidized beds spouting

Since the solid particles in the spouted bed are well mixed, their average temperature in different parts of the annulus can be considered to be the same, just as in the case of a fluidized bed. The maximum value of the heat transfer coefficient in the h-U plot is also similar to that in a dense-phase fluidized bed [Mathur and Epstein, 1974]. 

The heat transfer behavior in a spouted bed (see 9.8) is different from that in dense-phase and circulating fluidized bed systems as a result of the inherent differences in their flow structures. The spouted bed is represented by a flow structure that can be characterized by two regions the annulus and the central spouting region (see Chapter 9). The heat transfers in these two regions are usually modeled separately. For the central spouting region, the correlation of Rowe and Claxton (1965) can be used for Repf > 1,000... 

The heat transfer behavior in a spouted bed is different from that in the dense-phase or circulating fluidized bed system due to the inherent differences in their flow structures. The gas-to-particle heat transfer coefficient in the annulus region is usually an order of magnitude higher than that in the central spout region. The bed-to-surface heat transfer coefficient reaches a maximum at the spout-annulus interface and also increases with the particle diameter. 

---