Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Deep hole drilling

Deep Hole Drilling with Explosives. It has been described by ... [Pg.460]

Deep-hole drill deep round hole... [Pg.464]

Deep Hole Drilling with Small Diameters... [Pg.371]

Deep Hole Drilling with Small Diameters, Fig. 1 Effective rake angle in single-lip deep hole drilling with small diameters (Eichler 1996)... [Pg.372]

The chip formation is essential for deep hole drilling processes. A disadvantageous chip form combined with the limited cross sections of the... [Pg.372]

Twist drilling offers an alternative to the single-lip drilling for the manufacturing of deep holes with small diameters. Compared to the single-lip deep hole drilling by twist drilling. [Pg.373]

Micro Deep Hole Drilling by Thermal Ablation... [Pg.376]

Process Combination of Subsequent Thermal and Mechanical Micro Deep Hole Drilling... [Pg.377]

The sequential or parallel combination of different micro deep hole drilling processes aims utilization of specific technological and economic advantages and the avoidance of disadvantages. In the following two-process combinations of sequential thermal and mechanical deep hole drilling and their synergies are presented. [Pg.377]

Long shanked tools for deep hole drilling - challenges and Solutions). Dissertation, Universitat Stuttgart VDI-Richtlinie 3208-Entwurf (2009) Tiefbohren mit Einlippenbohrem (Deep hole drilling with gun drills). Beuth, Berlin... [Pg.379]

VDI-Richtlinie 3210, Blatt 1 (2006) Tiefbohrverfahren (Deep hole drilling). Beuth, Berlin VDI-Richtlinie 3211-Entwurf (2011) Tiefbohren auf Bearbeitungszentren (Deep hole drilling on machining centers). Beuth, Berlin... [Pg.379]

Zabel A, Heilmann M (2012) Deep hole drilling using tools with small diameters - process analysis and process design. CIRP Ann Manuf Technol 61 111-114... [Pg.379]

Form C Split point - for drills with a thick web - for drills employed in deep-hole drilling -> good centring capability -> generates less thrust... [Pg.419]

Drilling, Fig. 6 Deep-hole drilling technologies (a) Gun drilling, (b) BTA drilling, (c) Ejector drilling (Konig and Klocke 1999)... [Pg.420]

See other pages where Deep hole drilling is mentioned: [Pg.536]    [Pg.468]    [Pg.371]    [Pg.371]    [Pg.371]    [Pg.371]    [Pg.372]    [Pg.372]    [Pg.372]    [Pg.373]    [Pg.373]    [Pg.373]    [Pg.373]    [Pg.374]    [Pg.375]    [Pg.376]    [Pg.376]    [Pg.377]    [Pg.377]    [Pg.378]    [Pg.378]    [Pg.420]   
See also in sourсe #XX -- [ Pg.485 ]



SEARCH



Deep drilling

© 2024 chempedia.info