Copper-based catalysts addition reactions

The replacement of vanadia-based catalysts in the reduction of NOx with ammonia is of interest due to the toxicity of vanadium. Tentative investigations on the use of noble metals in the NO + NH3 reaction have been nicely reviewed by Bosch and Janssen [85], More recently, Seker et al. [86] did not completely succeed on Pt/Al203 with a significant formation of N20 according to the temperature and the water composition. Moreover, 25 ppm S02 has a detrimental effect on the selectivity with selectivity towards the oxidation of NH3 into NO enhanced above 300°C. Supported copper-based catalysts have shown to exhibit excellent activity for NOx abatement. Recently Suarez et al and Blanco et al. [87,88] reported high performances of Cu0/Ni0-Al203 monolithic catalysts with NO/NOz = 1 at low temperature. Different oxidic copper species have been previously identified in those catalytic systems with Cu2+, copper aluminate and CuO species [89], Subsequent additions of Ni2+ in octahedral sites of subsurface layers induce a redistribution of Cu2+ with a surface copper enrichment. Such redistribution... 

Purification this step features the second innovation of the process which, to eliminate the by-product acrolein, favors the formation of cyanohydrin by means of the hydrogen cyanide which is also present This operation takes place at low temperature (20 Q in agitated reactors, either continuously in the presence of a copper-based catalyst, or semi-continuously with a reaction phase in basic medium (caustic soda addition), followed by a neutralization period (sulfuric acid addition). The cyanohydrin obtained is then removed by vacuum distillation. The withdrawal may be sent to a thin layer evaporator to recover entrained acrylonitrile. These treatments must be conducted in the presence of a polymerization inhibitor and at a temperature below 55 C to prevent the rede-composition of cyanohydrin.... .. ... 

Copper-based catalysts are of considerable importance for industrial reactions, e. g. partial oxidation reactions. This contribution reports on a broad study of the catalytic activity of copper in model redox reactions, e. g. methanol oxidation and oxidative coupling of methane. In addition the interaction of Cu with these reactive gases was investigated by thermoanalytic techniques (TG/DTA, DSC), temperature programmed oxidation and reduction (TPO/tpR) and thermal desorption spectroscopy (TDS). Scanning electron microscopy (SEM) and electron backscattering diffraction (EBSD) was additionally used to characterise the copper catalyst before and after catalytic action. 

Ethynylation. Base-catalyzed addition of acetylene to carbonyl compounds to form -yn-ols and -yn-glycols (see Acetylene-DERIVED chemicals) is a general and versatile reaction for the production of many commercially useful products. Finely divided KOH can be used in organic solvents or Hquid ammonia. The latter system is widely used for the production of pharmaceuticals and perfumes. The primary commercial appHcation of ethynylation is in the production of 2-butyne-l,4-diol from acetylene and formaldehyde using supported copper acetyHde as catalyst in an aqueous Hquid-fiHed system. 

---