Copolymers biocompatible

Surface-initiated polymerization Coating in and outside pores Responsive polymers and copolymers Biocompatible or biodegradable Mclnnes et al. (2009) , Bonanno and DeLouise (2010) , Wang et al. (2012) , Vasani et al. (2011), Pace et al. (2012a) , Yoon et al. (2003)... 

Various in vivo studies have been performed to assess the biocompatibility of PEG/PBT copolymers upon implantation in soft and hard tissues." ... 

Implants in the rabbit corneas exhibited no observable inflammatory characteristics over a period of 6 weeks. Compared to other previously tested polymers, the inertness of these polyanhydrides rivals that of the biocompatible poly(hydroxyethyl methacrylate) and ethylene-vinyl acetate copolymer. Histological examination of the removed corneas also revealed the absence of inflammatory cells (21)... 

The flow behavior in miniaturized hemodialyzer modules with two types of biocompatible membrane materials, SMC and SPAN, was investigated by using doubly distilled water as the flowing fluid in both compartments, subsequently termed membrane side (M) and dialysate side (D), respectively (Figure 4.6.1 (c, d)) [12], SMC stands for Synthetically Modified Cellulose and SPAN for Special PolyAcryloNitrile-based copolymer (Akzo Nobel, Membrana GmbH), both types representing standard membrane material. The capillaries made from this hollow... 

Drug Release from PHEMA-l-PIB Networks. Amphiphilic networks due to their distinct microphase separated hydrophobic-hydrophilic domain structure posses potential for biomedical applications. Similar microphase separated materials such as poly(HEMA- -styrene-6-HEMA), poly(HEMA-6-dimethylsiloxane- -HEMA), and poly(HEMA-6-butadiene- -HEMA) triblock copolymers have demonstrated better antithromogenic properties to any of the respective homopolymers (5-S). Amphiphilic networks are speculated to demonstrate better biocompatibility than either PIB or PHEMA because of their hydrophilic-hydrophobic microdomain structure. These unique structures may also be useful as swellable drug delivery matrices for both hydrophilic and lipophilic drugs due to their amphiphilic nature. Preliminary experiments with theophylline as a model for a water soluble drug were conducted to determine the release characteristics of the system. Experiments with lipophilic drugs are the subject of ongoing research. 

It should be pointed out that the addition of substances, which could improve the biocompatibility of sol-gel processing and the functional characteristics of the silica matrix, is practiced rather widely. Polyethylene glycol) is one of such additives [110— 113]. Enzyme stabilization was favored by formation of polyelectrolyte complexes with polymers. For example, an increase in the lactate oxidase and glycolate oxidase activity and lifetime took place when they were combined with poly(N-vinylimida-zole) and poly(ethyleneimine), respectively, prior to their immobilization [87,114]. To improve the functional efficiency of entrapped horseradish peroxidase, a graft copolymer of polyvinylimidazole and polyvinylpyridine was added [115,116]. As shown in Refs. [117,118], the denaturation of calcium-binding proteins, cod III parvalbumin and oncomodulin, in the course of sol-gel processing could be decreased by complexation with calcium cations. 

Many kinds of nonbiodegradable vinyl-type hydrophilic polymers were also used in combination with aliphatic polyesters to prepare amphiphilic block copolymers. Two typical examples of the vinyl-polymers used are poly(/V-isopropylacrylamide) (PNIPAAm) [149-152] and poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) [153]. PNIPAAm is well known as a temperature-responsive polymer and has been used in biomedicine to provide smart materials. Temperature-responsive nanoparticles or polymer micelles could be prepared using PNIPAAm-6-PLA block copolymers [149-152]. PMPC is also a well-known biocompatible polymer that suppresses protein adsorption and platelet adhesion, and has been used as the hydrophilic outer shell of polymer micelles consisting of a block copolymer of PMPC -co-PLA [153]. Many other vinyl-type polymers used for PLA-based amphiphilic block copolymers were also introduced in a recent review [16]. 

---