Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cooling water system underdeposit corrosion

The three major forms of concentration cell corrosion are crevice corrosion, tuberculation, and underdeposit attack. Each form of corrosion is common in cooling systems. Many corrosion-related problems in the cooling water environment are caused by these three forms of wastage. The next three chapters—Chap. 2, Crevice Corrosion, Chap. 3, Tuberculation, and Chap. 4, Underdeposit Corrosion — will discuss cooling water system corrosion problems. [Pg.9]

Attack always occurs beneath a deposit. Cooling water system deposits are ubiquitous. Deposits can be generated internally as precipitates, laid down as transported corrosion products, or brought into the system from external sources. Hence, underdeposit corrosion can be found in virtually any cooling water system at any location. Especially troubled... [Pg.69]

Calcium carbonate makes up the largest amount of deposit in many cooling water systems (Fig. 4.16) and can be easily detected by effervescence when exposed to acid. Deposits are usually heavily stratified, reflecting changes in water chemistry, heat transfer, and flow. Corrosion may be slight beneath heavy accumulations of fairly pure calcium carbonate, as such layers can inhibit some forms of corrosion. When nearly pure, calcium carbonate is white. However, calcium carbonates are often intermixed with silt, metal oxides, and precipitates, leading to severe underdeposit attack. [Pg.73]

Passive attack involving underdeposit corrosion tends to involve large system surface areas and, hence, accounts for the greatest amount of metal loss, by weight, in cooling water systems. Active attack tends to produce intense localized corrosion and, as such, a greater incidence of perforations. [Pg.120]

Underdeposit corrosion is likely to occur in cooling systems where scales or foulants exist. The presence of general fouling and scales can cause the formation of a differential cell, which begins the process of corrosion because of the difference in oxygen concentration at the metal surface beneath the deposit and the oxygen concentration in water, a differential cell forms, resulting in the corrosion reaction. [Pg.182]


See other pages where Cooling water system underdeposit corrosion is mentioned: [Pg.27]    [Pg.734]   
See also in sourсe #XX -- [ Pg.69 ]




SEARCH



Cooling Corrosion

Cooling Corrosivity

Cooling systems

Cooling water

Cooling water system

WATER-COOLED

Water corrosion

Water corrosivity

Water: corrosiveness

© 2024 chempedia.info