Continuous phases overlapping channels

Continuous Contactor with Partly Overlapping Channels Solute transfer can occur between immiscible phases each flowing in separate adjacent but displaced microchannels, having only a small conduit in which the fluid interface is stable (partial overlap) [267,268]. 

Similarly to partially overlapping channels, microchannels with mesh contactors (Figure 7.2h) are used to create the partial contact of fluids. The advantage of these contactors is that both modes of operation, cocurrent and countercurrent, can be apphed. Besides, the flow is stabilized because of the solid support between two fluids. The solid contactors are porous membrane [9, 10] and metal sheets with sieve-like structure [11]. Similarly to parallel flow, the mass transfer in both cases is only by diffusion and the flow is under laminar flow regime dominated by capillary forces. The membrane contactor has the advantage of being flexible with respect to the ratio of two fluids. In addition to flow velocities, the mass transfer is a function of membrane porosity and thickness. In another type of microextractor, two microchaimels are separated by a sieve-like wall architecture to achieve the separation of two continuous phases. However, the hydrodynamics in both types of contactors is more complex because of interfadal support and bursting of fluid... 

---