Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Concentration permeability reduction factor affected

Lee and JGm examined the effect of lamellar structure of the dispersed EVA phase on the gas permeability of LDPE/EVA blends produced by film blowing (Lee and Kim, 1995, 1996). The viscosity ratio and dispersed domains size had a predominant influence on the formation of lamellae. An addition of LDPE-g-MA as a compatibilizer increased the number of particles and reduced the thickness of the layers. Between 5 and 6 wt% of compatibilizer produced a dispersed phase size of around 5 pm and the best oxygen permeability reduction (by a factor of 1600). Above this optimum concentration, the particle size becomes too small, resulting in shorter and thinner, and less effective, lamellae. Dispersed phase stretchability increased when a compatibilizer is present and when the viscosity ratio decreases, but it was not affected by the initial particle size. [Pg.736]


See other pages where Concentration permeability reduction factor affected is mentioned: [Pg.149]    [Pg.243]    [Pg.508]    [Pg.365]    [Pg.456]    [Pg.373]    [Pg.911]    [Pg.364]    [Pg.911]   


SEARCH



Concentration factor

Concentration reduction

Factors affecting concentration

Factors affecting permeability

Permeability concentrations

Permeability factor

Reduction factor

© 2024 chempedia.info