Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Composite characteristics modified process parameters

A clear improvement of the mechanical characteristics with regard to tensile and impact characteristics of multilayer web reiirforced PLA composites was achieved by using modified process parameters (compression moulding technique CP-2). In comparison to the processing technique CP-1 a pre-drying step was inserted (2 hr at 105°C) and the compression molding time in the hot press was reduced to 5 min. The cooling of the composites occurred in a cold press for 5 min at 25°C. [Pg.192]


See other pages where Composite characteristics modified process parameters is mentioned: [Pg.192]    [Pg.439]    [Pg.175]    [Pg.302]    [Pg.168]    [Pg.77]    [Pg.21]    [Pg.100]    [Pg.785]    [Pg.727]    [Pg.532]    [Pg.223]    [Pg.1018]    [Pg.785]    [Pg.261]    [Pg.422]    [Pg.57]    [Pg.21]    [Pg.124]    [Pg.697]    [Pg.294]    [Pg.2267]    [Pg.194]    [Pg.249]    [Pg.364]    [Pg.651]    [Pg.103]    [Pg.202]    [Pg.501]   


SEARCH



Characteristic parameters

Composite characteristics

Composite parameters

Composite processing

Composition processing

Parameters, modifying

Process characteristics

Process parameters

Processing characteristics

Processing parameters

© 2024 chempedia.info