Comparing calculated efficiency curves with

A6.5 Comparing calculated efficiency curves with measured efficiency curves... 

In particular, the neutron activation analyst, to whom efficiency curves may be an irrelevance, is not weU served by most spectrum analysis packages. As far as activation analysis is concerned, there is much evidence to show that absolute analysis, calculating concentrations from first principles, is much less accurate than comparative analysis. Apart from aU of the problems which derive from having to use efficiency calibration curves, there are specific problems associated with defining and measuring neutron fluxes and cross-sections which make absolute analysis not worthwhile, in my opinion (although there are those who have devoted a considerable amount of effort into developing absolute neutron activation analysis procedures who would dispute that). For that reason, almost every activation analysis involves irradiation of samples and standards. A direct comparison between them is the simplest solution. 

Because of the considerable effect that the secondary rate has upon the clinker entry temperature and the calculated efficiency of the cooler, the relevant values are, for the sake of better comparability, sometimes converted to equal secondary air rate and, with the aid of the cooling curves determined, also to equal clinker entry temperature. However, this procedure is meaningful only in those rare cases where the granulometric characteristics of the clinker in the respective plants to be compared are also similar. 

MCBase offers the possibility to load the original CAMPUS data of different suppliers from version 3.0 and higher into one database, which allows direct comparison. It has been developed in close cooperation with the CAMPUS consortium. For more information see http //www.m-base.de/. MCBase is user friendly and offers extremely efficient handling of material data. All CAMPUS options are available define search profiles define and sort tables print tables and data sheets curve overlay scatter plots. In addition MCBase 4.1 offers search in curves search for comparable grades text search update via Internet calculation of simulation parameters. A French version of MCBase is available from the distribution agent in France. 

---