Membrane reactor CO2-selective

Figure 1. Schematic of a Countercurrent CO2 Selective Membrane Reactor Containing Catalyst Particles...

Based on the membrane properties, water-gas shift (WGS) membrane reactors are classified into two categories, namely, CO2 selective membrane reactors and H2 selective membrane reactors. In the CO2 selective membrane reactors, CO2 was removed from the catalytic membrane reactor and the reaction mixture becomes H2-rich steam. This may cause over reduction of Fe- or Cu-based catalysts. However, in the H2-selective membrane, CO2 will be present at a higher concentration in the reaction medium, affecting the reaction rate. 

Reports are also available on CO2 selective membrane reactors for WGS reaction. Zou et al. [40] first time synthesized polymeric C02-selective membrane by incorporating fixed and mobile carriers in cross-linked poly vinyl alcohol. Micro-porous Teflon was used as support. They used Cu0/Zn0/Al203 catalyst for low temperature WGS reaction. They investigated the effect of water content on the CO2 selectivity and CO2/H2 selectivity. As the water concentration in the sweep gas increased, both CO2 permeability and CO2/H2 selectivity increased significantly. Figure 6.18 shows the influence of temperature on CO2 permeability and CO2/H2 selectivity. Both CO2 permeability and CO2/ H2 selectivity decrease with increasing reactimi temperature. After the catalyst activation, the synthesis gas feed containing 1% CO, 17% CO2, 45% H2 and 37% N2 was pumped into the membrane reactor. They are able to achieve almost 100% CO conversion. They also developed a one-dimensional non-isothermal model to simulate the simultaneous reaction and transport process and verified the model experimentally under an isothermal condition. 

---