Clamps quick release

Quick release couplings. Dimensions Part 1 - Clamped Type 8/74... 

Char collection receiver on cyclone Poor arrangement to facilitate easy removal of char Receiver replaced with removable storage bin with quick release clamps... 

Finally, in addition to the proven quick-release clamp closure, the finger-pin closure and the segment-ring closure have proved themselves with an opening and closure cycle of less than 5 minutes in large-scale plants. 

Where moulds are split to enable the moulding to be removed, accurate matching is important. There should be no gaps which may allow molten polymer to leak out or air to enter the mould. Mould splitting should be made rapid and easy, using quick release clamps or compressed cylinders. Undercuts are only permissible if the product is flexible enough to be collapsed out of the mould or if the moulding will shrink out of the undercut. Moulds for the jacketed system are obviously more expensive to manufac-... 

Quick Release Devices (Clip/Lock/Latch/Cam/Clamp)... 

Quick release mechanisms for rapid securing and release of parts, e.g. doors, access panels, tooling jigs and fixtures. Various types available, such as clips, locks, latches, cams, clamps and quarter turn fastening systems. 

---