Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

CIE color coordinates

In realizing the poor film-forming property of 9,10-(diphenyl)anthracene, the Kodak group improved this property by designing a series of blue emitters based on further substituted anthracene derivatives. The chemical structures of these materials were patented in a U.S. Patent in 1999 [239], In their patent, Kodak also reported the EL data using one of these compounds as a host material and using TBP as a blue dopant (Scheme 3.62). The device structures is ITO/CuPc/NPD/anthracene compounds.5%TBP/Alq3/Mg Ag. The EL of the device showed blue emission with CIE color coordinates of (0.144, 0.196). Without the... [Pg.355]

In Figure 9.13c, the EL spectra of the red-light-emitting a-Si H TFT AM-PLED and PLED are shown. EL peak positions at 654 and 653 nm, and full-width-at-half-maximum (FWHM) of 101 and 105 nm were obtained, for the a-Si H TFT AM-PLED and PLED, respectively. From the obtained EL spectra, Commission Internationale de l Eclairage (CIE) color coordinates [31] were calculated for AM-PLED and PLEDs, as shown in the inset of Figure 9.13c, and were found to be (0.67, 0.33) and (0.67, 0.32), respectively. These very... [Pg.609]

FIGURE 9.13 Optoelectronic characteristics of AM-PLED, (a) Calculated display luminance and estimated display luminance versus /data characteristics, (b) measured Paata evolution with the /data, and (c) PLED and AM-PLED electroluminescent (EL) spectra are shown. The CIE color coordinates of the PLED and AM-PLED are also shown in the inset of this figure. (From Hong, Y., Nahm, J.-Y., and Kanicki, J., IEEE J. Selected Top. Quantum Electron. Org. Light-Emitting Diodes, 10, 1, 2004 With permission.)... [Pg.610]

Composition WTDS specifi- cation Emission color CIE color coordinates Decay time... [Pg.256]

The CIE color coordinates are obtained by a similar procedure, repeating the convolution for each of the tabulated color matching functions that describe the response of the ideal observer s blue, green, and red cones (b, g, O). [Pg.450]

PHOLEDs Color CIE Color Coordinates EQE (%) Luminous Efficiency (cd/A) Lifetime to 50%L,(h) Initial Luminance (cd/m9 Voltage (V)... [Pg.477]

Fig. 12.9 a Schematic of four-package white LED, b the electronic luminescence spectra, c 1931 CIE color coordinates, and d photographs of the blue semiconductor-type LED and eight different colors of fully downconverted LPDF-capped pc-LEDs (Gb,m. Ab,m. Rn,b,m. Riw.b,m. R2w,b,m. R3w,b,m> R4W3.M, and R5w,bjm)- Reproduced from Ref. [32] by permission of The Royal Society of Chemistry... [Pg.382]

Fig. 15.9 PL spectra of BaY2Zn05 Eu and CIE color-coordinate diagram as a function of Eu contents (adapted with permission from Ref. [61]. Copyright 2008, American Institute of Physics) as well as the energy-level diagram of Eu ... Fig. 15.9 PL spectra of BaY2Zn05 Eu and CIE color-coordinate diagram as a function of Eu contents (adapted with permission from Ref. [61]. Copyright 2008, American Institute of Physics) as well as the energy-level diagram of Eu ...
Figure 10. The CIE color coordinates of the EL spectra of the ITO/PPy VPV/6P/PPy/Al device under different applied voltages. Figure 10. The CIE color coordinates of the EL spectra of the ITO/PPy VPV/6P/PPy/Al device under different applied voltages.
Fig. 30.17 CIE color coordinates diagram. The solid line with the numbered ticks represents the coordinates of the color of a blackbody emitter at the indicated temperatures. The wavelengths in micrometers of the pure colors are indicated at the periphery of the diagram. (Reproduced from Refs. 145 and 146.)... Fig. 30.17 CIE color coordinates diagram. The solid line with the numbered ticks represents the coordinates of the color of a blackbody emitter at the indicated temperatures. The wavelengths in micrometers of the pure colors are indicated at the periphery of the diagram. (Reproduced from Refs. 145 and 146.)...
Table 28.1 Emission (x, y) CIE color coordinates and other relevant parameters used to characterize the quality of a light source based on dye-bridged organic-inorganic hybrids. Table 28.1 Emission (x, y) CIE color coordinates and other relevant parameters used to characterize the quality of a light source based on dye-bridged organic-inorganic hybrids.
Fig. 6 displays the color coordinates for YP04 Eu computed by radiant imaging software based on the standard formulations made available by CIE (Commission International de F Eclairage, France). The CIE color coordinates for YP04 Eu were found to be x= 0.45, and y=0.29. [Pg.184]


See other pages where CIE color coordinates is mentioned: [Pg.13]    [Pg.17]    [Pg.356]    [Pg.611]    [Pg.414]    [Pg.169]    [Pg.32]    [Pg.38]    [Pg.39]    [Pg.358]    [Pg.142]    [Pg.1720]    [Pg.423]    [Pg.475]    [Pg.372]    [Pg.437]    [Pg.302]   
See also in sourсe #XX -- [ Pg.13 , Pg.17 , Pg.355 ]

See also in sourсe #XX -- [ Pg.888 ]




SEARCH



CIE coordinates

Color coordinates

© 2024 chempedia.info