Chlorosulfonated polyethylene primers

Acryhc stmctural adhesives have been modified by elastomers in order to obtain a phase-separated, toughened system. A significant contribution in this technology has been made in which acryhc adhesives were modified by the addition of chlorosulfonated polyethylene to obtain a phase-separated stmctural adhesive (11). Such adhesives also contain methyl methacrylate, glacial methacrylic acid, and cross-linkers such as ethylene glycol dimethacrylate [97-90-5]. The polymerization initiation system, which includes cumene hydroperoxide, N,1S7-dimethyl- -toluidine, and saccharin, can be apphed to the adherend surface as a primer, or it can be formulated as the second part of a two-part adhesive. Modification of cyanoacrylates using elastomers has also been attempted copolymers of acrylonitrile, butadiene, and styrene ethylene copolymers with methylacrylate or copolymers of methacrylates with butadiene and styrene have been used. However, because of the extreme reactivity of the monomer, modification of cyanoacrylate adhesives is very difficult and material purity is essential in order to be able to modify the cyanoacrylate without causing premature reaction. 

Solvent-home urethanes are still widely used to bond leather and athletic shoes. The OEM automotive market uses some solvent-home urethanes together with chlorosulfonated polyethylene as a primer. Some urethane solvent-home packaging adhesives are used for cap liners and for paper and foil lamination. Some textile laminating applications are still based on solvent-home urethanes. 

A one-pack primer based on chlorinated rubber or chlorosulfonated polyethylene (as is conventional with galvanized surfaces) or a two-pack epoxy primer is then applied. The primer can be coated with a topcoat system that is usually formulated with medium or long oil alkyd resins [11.39]. 

---