Chemical modification, advantages

There are two main advantages of acrylamide—acryUc-based flocculants which have allowed them to dominate the market for polymeric flocculants in many appHcation areas. The first is that these polymers can be made on a commercial scale with molecular weights up to 10—15 million which is much higher than any natural product. The second is that their electrical charge in solution and the charge density can be varied over a wide range by copolymerizing acrylamide with a variety of functional monomers or by chemical modification. 

Further chemical modification of the phenylpiperidine moiety has proven unusually fruitful in producing medicinal agents that affect the central nervous system. First, a series of compounds loosely related to the reversed meperidines produced several drugs with important antipsychotic activity. Further discussion of this pharmacologic activity, often referred to as major tranquilizer activity, will be found in the section on phenothiazines. The group led by Janssen took advantage of the chemistry of the... 

The second method also relies on site-specific chemical modification ofphosphoproteins (Oda et al., 2001). It involves the chemical replacement of phosphates on serine and threonine residues with a biotin affinity tag (Fig. 2.7B). The replacement reaction takes advantage of the fact that the phosphate moiety on phosphoserine and phosphothreonine undergoes -elimination under alkaline conditions to form a group that reacts with nucleophiles such as ethanedithiol. The resulting free sulfydryls can then be coupled to biotin to create the affinity tag (Oda et al., 2001). The biotin tag is used to purify the proteins subsequent to proteolytic digestion. The biotinylated peptides are isolated by an additional affinity purification step and are then analyzed by mass spectrometry (Oda et al., 2001). This method was also tested with phosphorylated (Teasein and shown to efficiently enrich phosphopeptides. In addition, the method was used on a crude protein lysate from yeast and phosphorylated ovalbumin was detected. Thus, as with the method of Zhou et al. (2001), additional fractionation steps will be required to detect low abundance phosphoproteins. 

Coupled enzyme assays provide a good alternative to chemical modification and permit a kinetic technique to be employed. In a coupled assay, the rate at which the product is formed is measured by using the product of the reaction as a substrate for a second enzyme reaction which can be monitored more easily. Coupled assays offer great flexibility in enzyme methodology while still retaining all the advantages of continuous monitoring techniques and are illustrated by Procedure 8.5. 

With respect to the polymeric backbone, two approaches exist for the preparation of functional polymers, the polymerization or copolymerization of monomers which carry the desired functionality, and secondly the chemical modification of preformed polymers. The former concept, the polymerization of prefunctionalized monomers, was often tested in the early days of polymer-assisted syntheses, e. g. in the preparation of polymers containing pyridine [12] or quinone [13] residues, and benzaldehyde [14] or phosphine [15] functionalities. Although the latter approach demands that the synthetic organic chemist acquires profound knowledge of polymers and polymerization, this strategy can have advantages because... 

---