Cationic coordination polymerization termination

On the basis of the nature of the initiation step, polymerization reactions of unsaturated hydrocarbons can be classified as cationic, anionic, and free-radical polymerization. Ziegler-Natta or coordination polymerization, though, which may be considered as an anionic polymerization, usually is treated separately. The further steps of the polymerization process (propagation, chain transfer, termination) similarly are characteristic of each type of polymerization. Since most unsaturated hydrocarbons capable of polymerization are of the structure of CH2=CHR, vinyl polymerization as a general term is often used. 

Various types of well-defined block copolymers containing polypropylene segments have been synthesized by Doi et al. on the basis of three methods (i) sequential coordination polymerization of propylene and ethylene 83-m>, (ii) transformation of living polypropylene ends to radical or cationic ones which initiate the polymerization of polar monomers 104, u2i, and (iii) coupling reaction between iodine-terminated monodisperse polypropylene and living polystyrene anion 84). In particular, the well-defined block copolymers consisting of polypropylene blocks and polar monomer unit blocks are expected to exhibit new characteristic properties owing to the effect of microphase separation. 

ROP is carried out in solution, in the melt, in the bulk or in suspension. The involved mechanism can be ionic (anionic or cationic), coordination-insertion or free-radical polymerization [19].The cationic pol)rmerization is initiated by only two catalysts, trifluoromethane-sulphonic acid and its methyl ester [10, 15]. Initiators such as potassium methoxide, potassium benzoate, zinc stearate, n-, sec-, fer-butyl lithium or 18-crown-6-ether complexes are added for the anionic polymerization to induce a nucleophilic reaction on the carbonyl to lead to an acyl-oxygen link cleavage. According to Jedkinski et al. only the primary alkoxides, such as the first mentioned catalyst, can yield polymers with negligible racemization, transesterification and termination [10]. 

Because of the nature of the active species, coordination polymerization has been classified as ionic polymerization, which follows the polyaddition mechanism s characteristic steps, in the growing of the polymeric chain initiation, propagation, and termination. As for the initiation step, the ionic active species is produced by the reaction between the catalyst and cocatalyst. Usually, the catalysts are actually precursor catalysts or precatalysts, which become the real cationic active species after the activation or reaction with the cocatalyst (Fig. 5.8). 

The products are complex counterions that enable multicentered coordination polymerization. Thus, the mechanism of vinyl ether polymerization proposed by Furukawa [46] is as follows. Two neighboring ether oxygens that are linked to the polymer chain close to the terminal cation become coordinated to the metal center of the complexed counterion. The molecules of the monomer can then approach the growing chain only from the opposite side and isotactic placement results ... 

For a monodisperse polymer sample, d = 1. The ranges of d values change drastically with the different mechanisms of polymerization. The values of d are 1.01-1.05 in living polymerization (anionic, cationic, living free radical, etc.), around 1.5 in condensation polymerization or coupling termination of polymerization, around 2 in disproportionation reactions on polymerization, 2-5 for high-conversion olefins, 5-10 in self-acceleration on common free radical polymerization, 8-30 in coordination polymerization, and 20-50 in branching reactions on polymerization. 

Addition polymerization is employed primarily with substituted or unsuhstituted olefins and conjugated diolefins. Addition polymerization initiators are free radicals, anions, cations, and coordination compounds. In addition polymerization, a chain grows simply hy adding monomer molecules to a propagating chain. The first step is to add a free radical, a cationic or an anionic initiator (I ) to the monomer. For example, in ethylene polymerization (with a special catalyst), the chain grows hy attaching the ethylene units one after another until the polymer terminates. This type of addition produces a linear polymer ... 

A kinetic chain reaction usually consists of at least three steps (1) initiation, (2) propagation, and (3) termination. The initiator may be an anion, a cation, a free radical, or a coordination catalyst. Although coordination catalysts are the most important commercially, the ionic initiators will be discussed first in an attempt to simplify the discussion of chain-reaction polymerization. 

Cationic polymerization of alkylene oxides generally produces low molecular weight polymers, although some work [26] seems to indicate that this difficulty can be overcome by the presence of an alcohol (Fig. 1.3). Higher molecular weight polyethylene oxides can be prepared by a coordinated nucleophilic mechanism that employs such catalysts as alkoxides, oxides, carbonates, and carboxylates, or chelates of alkaline earth metals (Fig. 1.4). An aluminum-porphyrin complex is claimed to generate immortal polymers from alkylene oxides that are totally free from termination reaction [27]. 

Group 4 elements (e.g., Ti, Zr) are used as typical catalyst precursors for olefin polymerization and serve as potent cationic components for polymer chain growth with the aid of aluminum (e.g., MAO) or boron co-catalysts. It would be more efficient and convenient if organoaluminum cations were used to polymerize olefins. From this viewpoint, following an earlier precedent with two-coordinate cations (Equation (98)),319,320 some three-coordinate organoaluminum cations hold promise, and their ability to promote polymerization of ethylene or terminal olefins is now... 

Thus there exist experimentally accessible situations that are intermediate between immediate termination by a counter-ion and living polymerizations. Combination of a counter-ion with a growing anion (cation) can be prevented, or at least retarded, by its coordination with a suitable particle. Some of the activators discussed in Chap. 3. Sect. 2.5 operate in this way. 

---