Cathodic protection cable types

For several years now, cable ducts have been manufactured from plastic pipes, which are watertight and form a continuous run of piping. In laying the ducts, low points can occur in which condensed water or water penetrating from the ends can collect. In many cases this water has led to corrosion damage in lead-sheathed cables. Lead-sheathed cables must therefore only be used in such ducts with an additional PE sheath of type A-PM2Y. Cathodic protection of these cables is not possible because of their complete insulation by the plastic pipe. 

The results of these experiments have been considered by the Joint Committee for the Co-ordination of the Cathodic Protection of Buried Structures and, in view of the various types of buried structures concerned and the circumstances in which field tests are conducted, the Committee decided not to amend its provisional recommendation that when cathodic protection is applied to a buried structure the maximum permissible potential change in the positive direction on a nearby pipe or cable should be 20 mV. If there is a history of corrosion on the unprotected installation no detectable positive change in structure/soil potential should be permitted. These criteria of interaction have been adopted in the British Standard Code of Practice for Cathodic Protection . 

---