Catalyst preparation, SAPO molecular

Catalysts Preparation. The silicoaluminophosphate (SAPO) molecular sieves employed in this study were synthesized in the laboratory of Professor Mark Davis in the Department of Chemical Engineering of the Virginia Polytechnic Institute, following the methods reported in U.S. Patent 4,440,871. The three different samples, distinguished by their microscopic structure, were the wide-pore SAPO-5, medium-pore SAPO-11, and the narrow-pore SAPO-34. Verification of their microscopic structure (through x-ray diffraction) and micropore diameters (by argon adsorption measurements) was performed at VPI. The SAPO molecular sieves were provided in the ammonium cation form. Ex situ calcination at 873 K for one hour in oxygen was performed on the SAPO samples prior to their use as catalysts for the propylene conversion. 

For 1-hexene isomerization and for acid catalyzed Cg aromatic reactions all molecular sieves were evaluated in their calcined, powdered state. For the study of Cg aromatics, selected SAPO molecular sieves were aluminum exchanged or steam treated as noted in Table IV. For bifunctional catalysts used in paraffin cyclization/isomerization and ethylbenzene-xylene interconversions, the calcined molecular sieve powder was mixed with platinum-loaded chlorided gamma alumina powder. These mixtures were then bound using silica sol and extruded to form 1/16" extrudates which were dried and calcined at 500°C. The bifunctional catalysts were prepared to contain about 0.54 platinum and about 40 to 504 SAPO molecular sieve in the finished catalysts. 

---