Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Carbon steel corrosion hydrogen attack

ALUM (10043-01-3) Al2(SOj3 Noncombustible solid. Forms sulfuric acid with water. Aqueous solution has a violent reaction with bases, amines, amides, inorganic hydroxides, and many other materials. See also sulfuric acid. Dry material is weakly corrosive to carbon steel aqueous solution attacks aluminum and other metals, forming hydrogen gas. Hydrogen gas can accumulate to explosive concentrations within enclosed or confined spaces. [Pg.42]

Dry material is weakly corrosive to carbon steel aqueous solution attacks aluminum and other metals, forming hydrogen gas. Hydrogen gas can accumulate to explosive concentrations within enclosed or confined spaces. [Pg.309]

Carbon steel, where not limited by sulfur corrosion or hydrogen attack, can be the most economical material... [Pg.262]

The amount of hydrogen partial pressure reduction depends upon the materials and the relative thickness of the cladding/ weld overlay and the base metal—the thicker the stainless barrier is relative to the base metal the better.32 Archakov and Grebeshkova33 mathematically considered how stainless steel corrosion barrier layers increase resistance of carbon and low alloy steels to high temperature hydrogen attack. [Pg.10]

The petroleum feedstocks that contain sulfur as an impurity are handled under ambient conditions in carbon-steel tanks and pipelines where the corrosion attack by sulfur is less severe. In the desulfurization step, vaporized feedstock is processed at 400°C in the presence of hydrogen sulfide (H2S) and carbonyl sulfide (COS) - both of which are highly corrosive. Stainless Steels (SS) 304, 316 or 321 (for the fired heater) are used as the material of construction for various pieces of process equipment in this section of the plant. Equipment failures occur because of external corrosion and thinning of fired-heater coils and interior deposition of carbon from coking which leads to overheating. Fuel-gas lines, that contain hydrocarbon vapors and H2S, should be constructed of SS 304 and heat traced to avoid condensation88. [Pg.65]


See other pages where Carbon steel corrosion hydrogen attack is mentioned: [Pg.136]    [Pg.136]    [Pg.43]    [Pg.45]    [Pg.14]    [Pg.262]    [Pg.1319]    [Pg.65]    [Pg.296]    [Pg.250]    [Pg.36]    [Pg.52]    [Pg.79]    [Pg.290]    [Pg.262]    [Pg.369]    [Pg.3]    [Pg.1]    [Pg.12]    [Pg.13]    [Pg.244]    [Pg.327]    [Pg.376]    [Pg.381]    [Pg.382]    [Pg.383]   
See also in sourсe #XX -- [ Pg.508 ]




SEARCH



Carbon corrosion

Carbon steel

Carbonate corrosion

Carbonic attack

Corrosion carbon steel

Hydrogen attack

Steel corrosion

© 2024 chempedia.info