Carbon nanotubes metallic tubes

The electronic properties of single-walled carbon nanotubes have been studied theoretically using different methods[4-12. It is found that if n — wr is a multiple of 3, the nanotube will be metallic otherwise, it wiU exhibit a semiconducting behavior. Calculations on a 2D array of identical armchair nanotubes with parallel tube axes within the local density approximation framework indicate that a crystal with a hexagonal packing of the tubes is most stable, and that intertubule interactions render the system semiconducting with a zero energy gap[35]. 

Hollow carbon nanotubes (CNTs) can be used to generate nearly onedimensional nanostrutures by filling the inner cavity with selected materials. Capillarity forces can be used to introduce liquids into the nanometric systems. Here, we describe experimental studies of capillarity filling in CNTs using metal salts and oxides. The filling process involves, first a CNT-opening steps by oxidation secondly the tubes are immersed into different molten substance. The capillarity-introduced materials are subsequently transformed into metals or oxides by a thermal treatment. In particular, we have observed a size dependence of capillarity forces in CNTs. The described experiments show the present capacities and potentialities of filled CNTs for fabrication of novel nanostructured materials. 

The ID electronic energy bands for carbon nanotubes [170,171, 172, 173, 174] are related to bands calculated for the 2D graphene honeycomb sheet used to form the nanotube. These calculations show that about 1/3 of the nano tubes are metallic and 2/3 are semiconducting, depending on the nanotube diameter di and chiral angle 6. It can be shown that metallic conduction in a (ra, m) carbon nanotube is achieved when... 

Carbon nanotubes can have one, two, or many sidewalls and are referred to as single-, double-, or multi-walled nanotubes (SWNT, DWNT, or MWNT). Nanotubes can be metallic, or semi-conducting depending on the chirality of the tube. Single-walled nanotubes (SWNT) are about 1 nm in diameter, and hundreds of nanometers long, whereas multi-walled nanotubes (MWNT) are like nested... 

The diameter of the nanotube is an additional important parameter, with smaller tubes presenting enhanced curvature and consequently enhanced reactivity. One last aspect affecting reactivity is the helicity of the carbon nanotubes. In metallic CNTs, the aromaticity is slightly lower than in the semiconducting types, rendering the former more susceptible to functionalization. 

Carbon nanotubes can be single walled (SWNT) or multi-walled (MWNT). SWNTs can be metallic or semiconducting, depending on their chirality. MWNTs contain several walls, so in combination they will tend to be metallic. In addition, as the band gap of semiconducting tubes varies inversely with their diameter, the larger diameter of MWNTs means that effectively most walls are metallic. 

The conductive properties of SWCNTs were predicted to depend on the helicity and the diameter of the nanotube [112, 145]. Nanotubes can behave either as metals or semiconductors depending upon how the tube is rolled up. The armchair nanotubes are metallic whereas the rest of them are semiconductive. The conductance through carbon nanotube junctions is highly dependent on the CNT/metal contact [146]. The first measurement of conductance on CNTs was made on a metallic nanotube connected between two Pt electrodes on top of a Si/Si02 substrate and it was observed that individual metallic SWCNTs behave as quantum wires [147]. A third electrode placed nearby was used as a gate electrode, but the conductance had a minor dependence on the gate voltage for metallic nanotubes at room temperature. The conductance of metallic nanotubes surpasses the best known metals because the... 

A variety of nanomaterials have been synthesized by many researchers using anodic aluminum oxide film as either a template or a host material e.g., magnetic recording media (13,14), optical devices (15-18), metal nanohole arrays (19), and nanotubes or nanofibers of polymer, metal and metal oxide (20-24). No one, however, had tried to use anodic aluminum oxide film to produce carbon nanotubes before Kyotani et al. (9,12), Parthasarathy et al. (10) and Che et al. (25) prepared carbon tubes by either the pyrolytic carbon deposition on the film or the carbonization of organic polymer in the pore of the film. The following section describes the details of the template method for carbon nanotube production. 

By applying the template technique, Kyotani et al. and Che et al. succeeded in preparing Pt and Pt/Ru metal-filled uniform carbon nanotubes in which the metal is present as either nanorods or nanoparticles. It should be noted that no metal was observed on the outside wall of the tubes. This is due to the preparation procedure, in which the metal precursor was loaded into the carbon-deposited alumina film before the dissolution of alumina by HF (see Fig. 10.1.9). Thus, there is no other space for metal to be loaded except in the channels. 

The bottom-up synthesis of metallic nanowires was further applied to construct a nanotransistor device.93 The sequence-specific winding of the homologous nucleic acid carried by the RecA-protein into the duplex DNA was used to address the nucleic acid/protein complex on the DNA scaffold (Fig. 12.27). The subsequent association of the anti-RecA antibody to the protein DNA complex, followed by the association of the biotinylated antiantibody, and the linkage of streptavidin-modified carbon nanotube deposited the tubes in the specific domain of the DNA scaffold. The further... 

Carbon nanotubes conduct electricity because of the extended network of delocalized ir-bonds that runs from one end of the tube to the other. Along the long axis of the tube, their conductivity is high enough to be considered metallic. The tubes are very strong, and their tensile strength parallel to the axis of the tube is the greatest of any material that has... 

---