Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Carbon monoxide flash point

Fire Hazards - Flash Point Not flammable Flammable Limits in Air (%) Not flammable Fire Extinguishing Agents Not pertinent Fire Extinguishing Agents Not To Be Used Not pertinent Special Hazards of Combustion Products Toxic carbon monoxide gas may form in fire Behavior in Fire Not pertinent Ignition Temperature Not pertinent Electrical Hazard Not pertinent Burning Rate Not pertinent. [Pg.95]

Exposure to hght evolves toxic carbon monoxide gas. The liquid is highly flammable flash point (cc) 5°F. [Pg.419]

Acrylic acid (CH2=CHC02H, melting point 13.5°C, boiling point 141°C, density 1.045, flash point 68°C) and acrylates were once prepared by reaction of acetylene and carbon monoxide with water or an alcohol, with nickel carbonyl as catalyst. [Pg.25]

Dimethyl phthalate is sensitive to prolonged exposure to light and it should therefore be stored in a cool, dark, dry, well-ventilated area that is protected from physical damage, and isolated from incompatible substances. Containers of dimethyl phthalate may be hazardous when empty as they may retain product residues such as vapors and liquids. There is a slight fire hazard when exposed to heat, and above the flash point (see Section 10) explosive vapor-air mixtures may be formed. Carbon dioxide and carbon monoxide are released when dimethyl phthalate is heated to decomposition. Solutions of dimethyl phthalate in acetone, dimethyl sulfoxide, ethanol... [Pg.248]

ANTHRACENE or ANTRACENO (Spanish) or ANTHRACIN (120-12-7) Cj4H,o Dust or fine powder forms an explosive mixture with air [explosion limits in air (vol %) 0.6to uel unknown flash point 250°F/121°C cc autoignition temp 1000°F/538°C Fire Rating 1]. Contact with strong oxidizers, chromic acid, calcium hypochlorite fluorine may cause flame and possible explosive reaction. High heat and contact with oxidizers release carbon dioxide carbon monoxide and acrid, toxic fumes and gases. On small fires, use dry chemical powder (such as Purple-K-Powder), foam, or COj extinguishers. ANTIBULIT (7681-49-4) see sodium fluoride. [Pg.88]


See other pages where Carbon monoxide flash point is mentioned: [Pg.66]    [Pg.294]    [Pg.294]    [Pg.227]    [Pg.321]    [Pg.322]    [Pg.327]    [Pg.329]    [Pg.369]    [Pg.462]    [Pg.430]    [Pg.323]    [Pg.429]    [Pg.53]    [Pg.433]    [Pg.430]    [Pg.603]    [Pg.567]    [Pg.315]    [Pg.17]    [Pg.28]    [Pg.29]    [Pg.32]    [Pg.33]    [Pg.47]    [Pg.55]    [Pg.67]    [Pg.130]    [Pg.144]    [Pg.149]    [Pg.161]    [Pg.163]    [Pg.168]    [Pg.169]    [Pg.170]    [Pg.180]    [Pg.181]    [Pg.182]    [Pg.192]    [Pg.206]    [Pg.207]    [Pg.208]    [Pg.210]    [Pg.211]    [Pg.215]   
See also in sourсe #XX -- [ Pg.440 , Pg.568 ]




SEARCH



Carbon flash

Flash point

© 2024 chempedia.info