Burner heads cleaning

Finally, periodic cleaning of the burner head and nebulizer is needed to ensure minimal noise level due to impurities in the flame. Scraping the slot in the burner head with a sharp knife or razor blade to remove carbon deposits and removing the burner head for the purpose of cleaning it in an ultrasonic cleaner bath are two commonplace maintenance chores. The nebulizer should be dismantled, inspected, and cleaned periodically to remove impurities that may be collected there. 

The design of the burner head and the method of atomization of the sample both influence the sensitivity which can be achieved. The burner head is designed to give a long narrow flame so that as many atoms as possible are presented in the light path. It needs to be kept spotlessly clean to minimize... 

Burner, access, or head gaskets should be inspected and replaced as required. AU refractories should be inspected for excessive cracking, chipping, erosion, or loose sections. This inspection should be carried out when the boiler is open for cleaning, or at least once a year. 

---