Block polymer synthesis with living

As discussed in Chapter 7, the absence of termination in living polymerization permits the synthesis of unusual and unique block polymers — star- and comb-shaped polymers. Living polymerization can also be employed to introduce a variety of desired functional groups at one or both ends of polymeric chains both in homo- and block polymers. In particular, living polymerization techniques provide the synthetic polymer chemist with a vital and versatile tool to control the architecture of a polymer complicated macromolecules can be synthesized to meet the rigid specification imposed by a scientific or technological demand. 

As discussed in Section 7.3, conventional free radical polymerization is a widely used technique that is relatively easy to employ. However, it does have its limitations. It is often difficult to obtain predetermined polymer architectures with precise and narrow molecular weight distributions. Transition metal-mediated living radical polymerization is a recently developed method that has been developed to overcome these limitations [53, 54]. It permits the synthesis of polymers with varied architectures (for example, blocks, stars, and combs) and with predetermined end groups (e.g., rotaxanes, biomolecules, and dyes). 

Ion coupling of anionic and cationic living polymers is an interesting procedure for the synthesis of a well-defined block copolymer. Attempted coupling of the polystyrene anion with the poly-THF cation initiated by triethyloxonium tetrafluoro-borate yielded a block copolymer mixed with homopolymers394. The block ef-... 

Polymer Synthesis and Characterization. This topic has been extensively discussed in preceeding papers.(2,23,24) However, we will briefly outline the preparative route. The block copolymers were synthesized via the sequential addition method. "Living" anionic polymerization of butadiene, followed by isoprene and more butadiene, was conducted using sec-butyl lithium as the initiator in hydrocarbon solvents under high vacuum. Under these conditions, the mode of addition of butadiene is predominantly 1,4, with between 5-8 mole percent of 1,2 structure.(18) Exhaustive hydrogenation of polymers were carried out in the presence of p-toluenesulfonylhydrazide (19,25) in refluxing xylene. The relative block composition of the polymers were determined via NMR. 

Tetraethylthiuram disulfide (13) induces St polymerization by the photodissociation of its S-S bond to give the polymer with C-S bonds at both chain ends (15). The C-S bond further acts as a polymeric photoiniferter, resulting in living radical polymerization. Eventually, some di- or monosulfides, as well as 13, were also examined as photoiniferters and were found to induce polymerization via a living radical polymerization mechanism close to the model in Eq. (18), e.g., the polymerization of St with 35 and 36 [76,157]. These disulfides were used for block copolymer synthesis [75,157-161] ... 

The first example of Iiving polyolefin with a uniform chain length was found in the low-temperature polymerization of propylene with the soluble catalyst composed of V(acac)3 and Al(C1Hi)2Cl. The mechanism of the living coordination polymerization is discussed on the basis of the kinetic and stereochemical data. Subsequently, some applications of living polypropylene are introduced to prepare tailor-made polymers such as terminally functionalized polymers and block copolymers which exhibit new characteristic properties. Finally, new types of soluble Ziegler-Natta catalysts are briefly surveyed in connection with the synthesis of living polyolefins. 

The living ends of a suitable polymer may initiate polymerization of another monomer, and thus lead to the synthesis of block polymers free of homopolymers. For sample, one prepares living polystyrene then adds pure methyl methacrylate to its solution and produces in this way a block polymer of styrene and methyl methacrylate (22). Actually, it is possible to produce living polymers with two active ends which can form a block polymer containing three segments—ABA. 

The ABA-type block copolymers B-86 to B-88 were synthesized via termination of telechelic living poly-(THF) with sodium 2-bromoisopropionate followed by the copper-catalyzed radical polymerizations.387 A similar method has also been utilized for the synthesis of 4-arm star block polymers (arm B-82), where the transformation is done with /3-bromoacyl chloride and the hydroxyl terminal of poly(THF).388 The BAB-type block copolymers where polystyrene is the midsegment were prepared by copper-catalyzed radical polymerization of styrene from bifunctional initiators, followed by the transformation of the halogen terminal into a cationic species with silver perchlorate the resulting cation was for living cationic polymerization of THF.389 A similar transformation with Ph2I+PF6- was carried out for halogen-capped polystyrene and poly(/>methoxystyrene), and the resultant cationic species subsequently initiated cationic polymerization of cyclohexene oxide to produce... 

Cationic Methods. Cationic methods have also found utility in preparation of block polymers however, generally speaking these methods suffer from a variety of synthesis problems including monomer-chain end equilibria, facile chain end termination or transfer with certain counteranions, and difficult molecular weight control. Most examples of living cationic systems include the use of an oxonium cation with a carefully selected counterion (Reaction 8). 

Novel rathenium complexes with carborane ligands were employed as efficient catalysts for controlled polymer synthesis via Atom Transfer Radical Polymerization (ATRP) mechanism. The ability of carborane ligands to stabihze high oxidation states of transition metals allows the proposed catalysts to be more active than their cyclopentadienyl counterparts. The proposed catalysts do not reqnire additives such as aluminium alkoxides. It was shown that introdnction of amine additives into the polymerization mixture leads to a dramatic increase of polymerization rate leaving polymerization controlled. The living nature of polymerization was proved via post-polymerization and synthesis of block copolymers. 

Moreover, PFS block co-polymers can be accessed via transition metal-catalyzed ROP of silicon-bridged [l]ferro-cenophanes (Section 12.06.3.3.4) in the presence of a polymer terminated with a reactive Si-H bond. This technique has been used successfully for the synthesis of both diblock and triblock co-polymers. For example, water-soluble PFS-/ -PEO 106 (PEO = poly(ethylene oxide)) has been prepared from monomer 72 and commercially available poly(ethylene glycol) modified at the end group (Scheme 9). In such cases, the polydispersity of the PFS blocks is higher than that obtained from anionic ROP (typically, PDI = 1.4) and the polydispersity of the co-block is determined by that of the original Si-H functionalized material. Nevertheless, block co-polymer syntheses that use the transition metal-catalyzed approach are very convenient, as the stringent purification and experimental requirements for living anionic polymerizations are unnecessary. 

---