Bismuth Hydroxide, Titration

Direct Titrations. The most convenient and simplest manner is the measured addition of a standard chelon solution to the sample solution (brought to the proper conditions of pH, buffer, etc.) until the metal ion is stoichiometrically chelated. Auxiliary complexing agents such as citrate, tartrate, or triethanolamine are added, if necessary, to prevent the precipitation of metal hydroxides or basic salts at the optimum pH for titration. Eor example, tartrate is added in the direct titration of lead. If a pH range of 9 to 10 is suitable, a buffer of ammonia and ammonium chloride is often added in relatively concentrated form, both to adjust the pH and to supply ammonia as an auxiliary complexing agent for those metal ions which form ammine complexes. A few metals, notably iron(III), bismuth, and thorium, are titrated in acid solution. 

Direct titration method offers a serious limitation for the assay of aluminium and bismuth containing pharmaceutical inorganic substances because of the precipitation of the metal as their corresponding hydroxides in alkaline media thereby introducing undesirable errors. 

Masking can be achieved by precipitation, complex formation, oxidation-reduction, and kinetically. A combination of these techniques may be employed. For example, Cu " can be masked by reduction to Cu(I) with ascorbic acid and by complexation with I . Lead can be precipitated with sulfate when bismuth is to be titrated. Most masking is accomplished by selectively forming a stable, soluble complex. Hydroxide ion complexes aluminum ion [Al(OH)4 or AlOa"] so calcium can be titrated. Fluoride masks Sn(IV) in the titration of Sn(II). Ammonia complexes copper so it cannot be titrated with EDTA using murexide indicator. Metals can be titrated in the presence of Cr(III) because its EDTA chelate, although very stable, forms only slowly. 

---