Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Palladium bis 2-

It is reasouable to expect that the use of rigid 60° angular buildiug blocks with 180° liuear linking units would provide triangular structures. Indeed, this has been demonstrated by the self-assembly of 4,7-phenanthroline and the linear phenyl-bridged bis-palladium complex, which yields the triangle (26). ... [Pg.5687]

For the palladium dibenzylideneacetone complex (1), NMR data to support the proposition that the bis-phosphine acts as a bidentate ligand has been reported. A triflate salt of the TT-allyl palladium complex has been isolated and is stable in the solid state. However, no crystals suitable for X-ray analysis were obtained. An X-ray crystal structure of the ligand and a bis-palladium complex has been reported. The palladium complexes are generated just before use under an inert atmosphere exposure to air affords a catalytically inactive tetra-coordinated palladium(II) species. ... [Pg.100]

Asymmetric Michael addition of a-cyanoacetates to enones, constructing densely adjacent quaternary and tertiary stereocentres, has been attained by combination of a catalytic action of soft Pd complexes as soft Lewis acids and Brpnsted acids, for example, AcOH. Investigation of the kinetics revealed that the C-C-bond-forming step takes place almost instantaneously with the bis-palladium complex right after the substrate coordination. ... [Pg.435]

Also, pincer ligands have been prepared from l,3-bis(diisopropyl or /-butyl)(phosphinomethyl)ruthenocene. Notably, the iridium and rhodium complexes of these have been discussed. The iridium hydride complex [Ir(H)(Cl)[ 2,5-(Bu PCH2)2C5H2 Ru(Cp)]] exists in the form of a mixture of endo- and o-isomers, the exo being the more thermodynamically favorable.Trimetallic ruthenocene/ferrocene ligands 23 have been prepared in three steps from l,l -diacetylruthenocene, and further derivatized to the pentametallic bis-palladium allyl complex 24. [Pg.638]

An inventive synthesis of (—)-swainsonine (378) by Trost and Patterson took advantage of the enantioselective desymmetrization of the mese-bis (carbamate) 514 with tris(dibenzylideneacetone)bis(palladium) in the presence of the chiral bis (phosphine) ligand (i .,J )-515 in order to achieve the... [Pg.93]

Palladium catalyzed cycloisomerizations of 6-cn-l-ynes lead most readily to five-membered rings. Palladium binds exclusively to terminal C = C triple bonds in the presence of internal ones and induces cyclizations with high chemoselectivity. Synthetically useful bis-exocyclic 1,3-dienes have been obtained in high yields, which can, for example, be applied in Diels-Alder reactions (B.M. Trost, 1989). [Pg.84]

In the synthesis of morphine, bis-cyclization of the octahydroisoqtiinolinc precursor 171 by the intramolecular Heck reaction proceeds using palladium trifluoroacetate and 1,2,2,6,6-pentamethylpiperidine (PMP). The insertion of the diene system forms the rr-allylpalladium intermediate 172, which attacks the phenol intramolecularly to form the benzofuran ring (see Section 1.1.1.3). Based on this method, elegant total syntheses of (-)- and (+ )-dihydrocodei-none and (-)- and ( + )-morphine (173) have been achieved[141]. [Pg.153]

The cyclohexadiene derivative 130 was obtained by the co-cyclization of DMAD with strained alkenes such as norbornene catalyzed by 75[63], However, the linear 2 1 adduct 131 of an alkene and DMAD was obtained selectively using bis(maleic anhydride)(norbornene)palladium (124)[64] as a cat-alyst[65], A similar reaction of allyl alcohol with DMAD is catalyzed by the catalyst 123 to give the linear adducts 132 and 133[66], Reaction of a vinyl ether with DMAD gives the cyclopentene derivatives 134 and 135 as 2 I adducts, and a cyclooctadiene derivative, although the selectivity is not high[67]. [Pg.487]

Reduction. These hydroxybenzaldehydes can be reduced by catalytic hydrogenation over palladium or platinium to yield the corresponding hydroxybenzyl alcohols, but the electrolytic reduction in an alkaline medium gives the coupling product l,2-bis(4-hydroxyphenyl)ethane-l,2-diol in very good yield from 4-hydroxybenzaldehyde (49—51). [Pg.505]

Diacetone-L-sorbose (DAS) is oxidized at elevated temperatures in dilute sodium hydroxide in the presence of a catalyst (nickel chloride for bleach or palladium on carbon for air) or by electrolytic methods. After completion of the reaction, the mixture is worked up by acidification to 2,3 4,6-bis-0-isoptopyhdene-2-oxo-L-gulonic acid (2,3 4,6-diacetone-2-keto-L-gulonic acid) (DAG), which is isolated through filtration, washing, and drying. With sodium hypochlorite/nickel chloride, the reported DAG yields ate >90% (65). The oxidation with air has been reported, and a practical process was developed with palladium—carbon or platinum—carbon as catalyst (66,67). The electrolytic oxidation with nickel salts as the catalyst has also... [Pg.16]

Bis(benzonitrile)palladium(II) chloride, benzene, reflux, 16-20 h, 86% yield. [Pg.263]

The Boekelheide reaction has been applied to the synthesis of non-natural products with the preparation of quaterpyridines serving as an example. The sequence began with the 2,4-linked bipyridyl-N-oxide 25. Execution under the typical reaction conditions produced the expected bis-pyridone 26. Treatment with POCI3 afforded the corresponding dichloride that was submitted to a palladium-catalyzed coupling with 2-stannyl pyridine to produce the desired quaterpyridine 27. [Pg.344]

Diphenylimidazole with palladium acetate forms the cyclometallated complex 80 (X = OAc) (97AOC491). The acetate group is replaced by chloride or bromide when 80 (X = OAc) reacts with sodium chloride or lithium bromide, respectively, to give 80 (X = C1, Br). Bromide with diethyl sulfide forms the mononuclear complex 81. Similar reactions are known for 1 -acetyl-2-phenylimidazole (96JOM(522)97). 1,5-Bis(A -methylimidazol-2-yl)pen-tane with palladium(II) acetate gives the cyclometallated complex 82 (OOJOM (607)194). [Pg.138]

The palladium-catalyzed reaction of o-iodoanilides with terminal acetylenic carbinols provides a facile route to the synthesis of quinolines using readily available starting materials (93TL1625). When o-iodoanilide 126 was stirred with acetylenic carbinol 127 in the presence of bis-triphenyl phosphine palladium(ll) chloride in triethylamine at room temperature for 24 h, the substituted alkynol 128 was obtained in 65% yield. On cyclization of 128 with sodium ethoxide in ethanol, 2-substituted quinoline 129 was obtained in excellent yield. [Pg.22]


See other pages where Palladium bis 2- is mentioned: [Pg.574]    [Pg.212]    [Pg.212]    [Pg.494]    [Pg.332]    [Pg.332]    [Pg.416]    [Pg.42]    [Pg.574]    [Pg.212]    [Pg.212]    [Pg.494]    [Pg.332]    [Pg.332]    [Pg.416]    [Pg.42]    [Pg.165]    [Pg.182]    [Pg.73]    [Pg.240]    [Pg.299]    [Pg.162]    [Pg.146]    [Pg.156]    [Pg.41]    [Pg.368]    [Pg.345]    [Pg.674]    [Pg.1149]    [Pg.216]    [Pg.218]    [Pg.26]    [Pg.27]    [Pg.30]    [Pg.136]    [Pg.139]    [Pg.148]    [Pg.152]   
See also in sourсe #XX -- [ Pg.168 ]

See also in sourсe #XX -- [ Pg.38 , Pg.299 ]

See also in sourсe #XX -- [ Pg.26 , Pg.34 ]

See also in sourсe #XX -- [ Pg.830 ]

See also in sourсe #XX -- [ Pg.34 , Pg.103 , Pg.319 ]

See also in sourсe #XX -- [ Pg.53 ]

See also in sourсe #XX -- [ Pg.92 ]

See also in sourсe #XX -- [ Pg.302 ]

See also in sourсe #XX -- [ Pg.56 , Pg.575 ]

See also in sourсe #XX -- [ Pg.56 , Pg.474 , Pg.575 ]

See also in sourсe #XX -- [ Pg.46 ]

See also in sourсe #XX -- [ Pg.286 ]

See also in sourсe #XX -- [ Pg.244 ]

See also in sourсe #XX -- [ Pg.34 , Pg.103 , Pg.319 ]

See also in sourсe #XX -- [ Pg.36 ]

See also in sourсe #XX -- [ Pg.34 , Pg.133 ]

See also in sourсe #XX -- [ Pg.286 ]

See also in sourсe #XX -- [ Pg.359 ]

See also in sourсe #XX -- [ Pg.60 , Pg.78 ]

See also in sourсe #XX -- [ Pg.144 ]

See also in sourсe #XX -- [ Pg.51 ]

See also in sourсe #XX -- [ Pg.32 ]

See also in sourсe #XX -- [ Pg.830 ]

See also in sourсe #XX -- [ Pg.144 ]

See also in sourсe #XX -- [ Pg.2 , Pg.3 , Pg.4 , Pg.5 , Pg.6 , Pg.7 , Pg.8 , Pg.9 , Pg.10 , Pg.11 , Pg.12 , Pg.13 , Pg.14 , Pg.15 ]

See also in sourсe #XX -- [ Pg.26 ]

See also in sourсe #XX -- [ Pg.359 ]

See also in sourсe #XX -- [ Pg.26 ]

See also in sourсe #XX -- [ Pg.109 , Pg.110 , Pg.111 ]

See also in sourсe #XX -- [ Pg.517 ]




SEARCH



1.3- Bis imidazolium bromide reaction with palladium acetate

1.5- Bis pentane reaction with palladium acetate

Aryl halides bis palladium

Bis 7r-allyl palladium complex

Bis palladium complexes

Bis palladium dichloride

Bis( 1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)palladium

Bis(dibenzylideneacetone)palladium(O)

Bis(nucleosidato)palladium(II)

Bis(tricyclohexylphosphine)palladium

Bis-carbenes palladium

Butanediyl) bis (triphenylphosphine) palladium (II)

Carbonylations bis palladium

Chloro(methyl)bis(triphenylphosphine)palladium(II)

Cross-coupling bis palladium

Olefins Wacker oxidations, bis palladium

Oxidations bis palladium

Palladium bis allylic oxidation

Palladium bis chloride

Palladium chloride, bis diazo compound decomposition catalyst

Palladium! II) chloride, bis

Palladium, bis dichloro

Palladium, bis dichlorocatalyst

Palladium, bis dichlorocatalyst vinyl iodide reaction with organotin compounds

Palladium, bis pentakishydrogenation

Palladium, bis pentakishydrogenation alkenes

Phenyl-bis methane, reaction with palladium

Phenyl-bis methane, reaction with palladium complexes

Phosphine, bis phenyl-, palladium complex platinum complexes

Phosphine, bis[2 ethyljphenyl-, palladium complex platinum complexes

Primary alcohols bis palladium

© 2024 chempedia.info