Batch Reactor.See

The conversion concept of Rogers PBC system was overfired, updraft, fixed horizontal grate, and cylindrical batch reactor (see Figure 1). 

Axell has studied two types of conversion concepts (1) over-fired, updraft, fixed horizontal grate, and batch reactor (see Figure 11 A) and (2) downdraft, underfired, fixed horizontal grate, and batch reactor (see Figure 1 IB). 

The catalytic screening was carried out with high-pressure acetylene in a batch reactor (see Section IV). The range of results are shown in Table I. 

The approach to the design of non-isothermal tubular reactors with plug flow parallels that already outlined for batch reactors (see Sect. 2.4.)... 

Similar studies were made on a mesh microreactor comprising Pd/Al203 and Pt/Al203 catalysts coated on a microstructured mesh [270,271]. The global rate constants were 56 and 1.41/s for the Pd and Pt catalysts, respectively [271]. An activation energy of 46 5 kj/mol was found for the Pt catalyst in the mesh reactor, which corresponds to the value of 39 kj/mol determined for a commercial Pt/ A1203 powder catalyst in a well-behaved batch reactor (see Figure 4.54). 

This small rate indicates use of a batch reactor. See Ch. 4. 

For an ideal batch reactor (see, e.g., Steinfeld, Francisco, and Hase, Chemical Kinetics and Dynamics, Prentice-Hall, 1989) ... 

If temperature T is chosen arbitrarily, the set of equations presented above will simulate the performance of an isothermal constant-volume batch reactor. See Figures 6-1 and 6-2 for CO conversion at various temperatures and initial pressures. 

APPENDIX 4 — ASSESSING FIRE AND EXPLOSION HAZARDS IN A SIMPLE BATCH REACTOR (See Figure 7.1, page 127)... 

---