Automatic picking

Comment-. All models yield the same l-value, but differ in the number of degrees of freedom to be used. The difference between the means is barely significant in two cases. Suggestion acquire more data to settle the case. Program TTEST automatically picks the appropriate equation(s) and displays the result(s). Equation (1.21) is used to scan the parameter space (Xmean Sx, n) in the vicinity of the true values to determine whether a small change in experimental protocol (n) or measurement noise could have changed the interpretation from Hq to H or vice versa. 

AA Auto Answer. The modem is set to automatically pick up after a few rings. 

To operate the Opus analyzer, the operator selects a test and provides other information through an interactive touch screen/LCD display. When prompted, the operator inserts one assay-specific test module per test into the loading port of the instrument. The loader transports the test module to a 20 position incubated rotor where the test module is equilibrated to 37 C. The analyzer prompts for sample cup and pipette tip trays. Once these trays are supplied, the analyzer automatically picks up a new pipette tip, aspirates the sample and dispenses the sample onto the test module. For certain assays the pipettor also transports conjugate, substrate or other reagents from the test module wells to the test module dispense port. After processing, the test module is rotated to the read position where the fluorimeter takes measurements. The rotor then moves the used test module to the loader/ ejector where it is... 

Observe that KEY has automatically picked out the higher percent matches, based on a threshold level that the user can adjust. This is the information that scientists of the 1800 s would have found most useful in their guest to order the elements. All but one of the similarities that are reported deal with elements that are neighbors in the same group. More careful thought reveals that Iodine and Tellurium are in the same row of neighboring groups. 

Dai and MacBeth [1995] used an artificial neural network for automatic picking of local earthquake data. The network is trained on noise and P-wave segments. This method is also not applied to the raw signal directly, but to the modulus of a windowed segment of the signal. The output of the network consists of two values, which are parameters of a function that accentuates the difference between the actual output and ideal noise. The disadvantage of this approach is that it is time intensive. 

Dai H, MacBeth C (1995) Automatic picking of seismic arrivals in local earthquake data using an artificial neural network. Geophysical Journal International 120 758-774... 

Earle P, Shearer P (1994) Characterization of global seismograms using an automatic picking algorithm. Bulletin of the Seismological Society of America 84 (2) 366-377... 

From these P-wave onsets a first estimation of the source coordinates is made using an iterative least-squares procedure. If the residual error is larger than 0.8 m, the onsets with the largest residues are stepwise eliminated and a new solution is calculated until the residual error drops below the said limit. In order to be able to locate sources outside of the sensor network, we also consider the S-wave onsets. Therefore, we automatically pick the S-wave onsets in the time interval expected due to the result of the location using P-wave onsets only. In the second step of source location, we use the found S-wave onsets together with the remained P-wave onsets. P-wave and S-wave onsets with large residues are again eliminated until... 

The focal mechanisms of the located events were estimated from polarities of the automatically picked first motions. The polarity value pol of a single event is calculated by ... 

Implicit in the structure of skills is a built-in monitoring loop which detects deviations from the programme at the skill level. Deviations from the plan at the rule level are less automatically picked up and depend on good warnings, upon building in designed system blocks which do not allow you to proceed further after such a mistake, or upon intervention by others. 

This can be a very expensive and time consuming process. A redesigned process integrating RFID technology would have automatic access to the store network for the automatic picking of a specific product in order to fix a power outage that just occurred. 

The orthogonal collocation method, which is an extension of the method just described, provides a mechanism for automatically picking the collocation points by making use of orthogonal polynomials. This method chooses the trial functions yj(j ) and y x) to be the linear combination... 

---