Atomization glow discharge

The conventional method for quantitative analysis of galHum in aqueous media is atomic absorption spectroscopy (qv). High purity metallic galHum is characteri2ed by trace impurity analysis using spark source (15) or glow discharge mass spectrometry (qv) (16). 

Use of glow-discharge and the related, but geometrically distinct, hoUow-cathode sources involves plasma-induced sputtering and excitation (93). Such sources are commonly employed as sources of resonance-line emission in atomic absorption spectroscopy. The analyte is vaporized in a flame at 2000—3400 K. Absorption of the plasma source light in the flame indicates the presence and amount of specific elements (86). 

Figure 1 Schematic of DC glow-discharge atomization and ionization processes. The sample is the cathode for a DC discharge in 1 Torr Ar. Ions accelerated across the cathode dark space onto the sample sputter surface atoms into the plasma (a). Atoms are ionized in collisions with metastable plasma atoms and with energetic plasma electrons. Atoms sputtered from the sample (cathode) diffuse through the plasma (b). Atoms ionized in the region of the cell exit aperture and passing through are taken into the mass spectrometer for analysis. The largest fraction condenses on the discharge cell (anode) wall.

Glow discharge is essentially a simple and efficient way to generate atoms. Long known for its ability to convert solid samples into gas-phase atoms, GD techniques provide ground-state atoms for atomic absorption or atomic fluorescence, excited-state atoms for atomic emission, and ionised atoms for MS [158], Commercial instrumentation has been developed for all these methods, except for GD-AFS and pulsed mode GD. 

In AFS, the analyte is introduced into an atomiser (flame, plasma, glow discharge, furnace) and excited by monochromatic radiation emitted by a primary source. The latter can be a continuous source (xenon lamp) or a line source (HCL, EDL, or tuned laser). Subsequently, the fluorescence radiation is measured. In the past, AFS has been used for elemental analysis. It has better sensitivity than many atomic absorption techniques, and offers a substantially longer linear range. However, despite these advantages, it has not gained the widespread usage of atomic absorption or emission techniques. The problem in AFS has been to obtain a... 

---