Atomic force microscopy thermoplastic elastomers

IPNs are also attractive for development of materials with enhanced mechanical properties. As PDMS acts as an elastomer, it is of interest to have a thermoplastic second network such as PMMA or polystyrene. Crosslinked PDMS have poor mechanical properties and need to be reinforced with silica. In the IPNs field, they can advantageously be replaced by a second thermoplastic network. On the other hand, if the thermoplastic network is the major component, the PDMS network can confer a partially elastomeric character to the resulting material. Huang et al. [92] studied some sequential IPNs of PDMS and polymethacrylate and varied the ester functionalities the polysiloxane network was swollen with MMA (methyl methacrylate), EMA (ethyl methacrylate) or BuMA (butyl methacrylate). Using DMA the authors determined that the more sterically hindered the substituent, the broader the damping zone of the IPN (Table 2). This damping zone broadness was also found to be dependant on the PDMS content, and atomic force microscopy (AFM) was used to observe the co-continuity of the IPN. 

Botterhuis NE, Karthikeyan S, Veldman D, Meskers SCJ, Sijbesma RP (2008) Molecular recognition in bisurea thermoplastic elastomers studied with pyrote-based fluorescent probes and atomic force microscopy. Orem Commun 2008(33) 3915-3917... 

---