Aryl nitrile oxides, cycloaddition

Isoxazolines 79, obtained from aromatic nitrile oxide cycloadditions to cyclohex-2-enone, reacted with nickel peroxide to give 3-aryl-6,7-dihydro[l] benzoisoxazol-4(5// )-ones 80. In contrast, the corresponding 2-bromocyclohex-2-enone underwent nitrile oxide cycloaddition, followed by dehydrobromination, to afford the regioisomeric 3-aryl-4,5-dihydro[l]benzoisoxazol-7(6//)-ones 81 (Scheme 1.23) (242). 

Cycloaddition of 5,6-dihydropyran-2-one with aromatic nitrile oxides leads to 3-aryl-3a,6,7,7a-tetrahydropyrano[3,4-d]isoxazol-4(47/)-ones 98. The latter react with nickel peroxide to give the corresponding dihydropyranoisoxazolones 99. Similar to 2-bromocyclohex-2-enone, 3-bromo-5,6-dihydropyran-2-one undergoes nitrile oxide cycloaddition, followed by dehydrobromination, to form regioi-someric 3-aryl-5,7-dihydropyrano 4,3-c/ isoxazol-7(4//)-ones 100 (Scheme 1.24) (242). 

Cyclohepta[4,5)pyrrolo[l,2-fl]imidazoles, 2-aryl-, halogenation. 59, 283 Cyclohepta[4,5)pyrrolo[3,2-e][l,2,4]triazine, 3-chloro- 10-(4-chlorobutyD-5,6,7,8,9,10-hexahydro-, 59, 50 3//-Cyclohept(e]isoxazoles, 3a,4,5,6,7,8-hexahydro-, 60, 311-3 Cyclohex-2-en-l-ones, 2- and 3-bromo-, regioselectivity of nitrile oxide cycloaddition, 60, 304 Cyclols, piperazine-2,5-dione-related, 57, 211-7... 

Similar [34-2] cycloadditions with C-aryl nitrile oxides and other terminal fluoroalkylated al-kenes (Rf = C-2F5, and fluoroalkylated alkynes provide high yields of cycloadducts. 

Similar [3 4-2] cycloadditions with C-aryl nitrile oxides and other terminal fiuoroalkylated al-kenes (RF = C2F5, C6F13) and fiuoroalkylated alkynes provide high yields of cycloadducts.86,87 The nitrile oxides can be generated by various methods. Generation from bromoaldoximes in a chloroform/sodium hypochlorite biphase medium is efficient.86... 

In a search for new isoxazole-based liquid crystalline compounds, a 22-member library of 3,5-diaryl isoxazoles 628 was prepared by parallel synthesis on solid phase (Rink resin) through 1,3-dipolar cycloaddition of supported phenylacetylene units with suitable aryl nitrile oxides generated in situ from hydroxyiminoyl chlorides. Cleavage from the resin under acidic conditions allowed the generation of the cyano moiety <2004TL2277>. 

After consideration of the moderate complexity of our target 10 b, it was clear that the best hope for multi-kilo preparations would still incorporate the useful [3+2] cycloaddition of an aryl nitrile oxide with a properly functionalized propylene to quickly establish the 2,5-disubstituted isoxazoline ring. Once that is assumed, there remained three conceptual routes to 10b (Fig. 8). 

More recently, Oppolzer has proposed the use of enantiomeric aryl sultams 1.135 (R=Me), each being easily obtained from saccharin [468], In general, these chiral auxiliaries can be applied in the same types of reactions as the camphor sul-tam [469, 470], However, the low selectivity observed in nitrile oxide cycloadditions led to the design and synthesis of a more bulky auxiliary 1.135 (R = rert-Bu), winch is correspondingly more stereoselective [471]. Nevertheless, the cleavage of the chiral auxiliary necessitates the use ofLil BH, and generates alcohols as the final products. 

An elegant and flexible strategy for the assembly of a synthon for the ort/to-hydroxyaryl-1,3-diketone required for a chromone synthesis depends on the use of an isoxazole as surrogate for the 1,3-diketone unit (25.7). An isoxazole was produced by the cycloaddition (25.12.1.2) of an aryl nitrile oxide to tri-n-butylstannylacetylene, the product coupled with 2,4,6-trihydroxyiodobenzene and then the N-0 bond hydrogenolytically cleaved. ... 

Elsewhere, x-ray crystallographic analyses have been used to define the structure of a dimeric product from A (2)-acetylation of 4-phenyl-5/f-2,3-benzodiazepine <84JCS(P1)2027>, and confirm 2-ethoxycarbonyl-5-methyl-l0-aryl-l,2,9-triaza-8-oxabicyclo[5.3.0 ]-3,5,9-decatrienes (10), as the main class of products from cycloaddition of aryl nitrile oxides and l-ethoxycarbonyl-5-methyl-l//-... 

Thus, in the presence of an Ru-catalyst (e.g., RuCl(cod)(C5Me5)), 3,4-disubstituted isox-azoles (15, R =H) are obtained as pure regioisomers [308]. In contrast, in the presence of Cu(I) salts (i.e., via Cu(I)-acetyHdes) the regiocomplementary 3,5-disubstituted isoxazoles (15, R =H) are formed exclusively [309]. Alternatively, 3,5-disubstituted isoxazoles can be regioselectively and efficiently prepared by 1,3-dipolar cycloaddition of aryl nitrile oxides with 1,1-disubstituted bromoalkenes followed by spontaneous aromatization of the 5,5-disubstituted bromoisoxazoline intermediates by loss of HBr [310]. 

Cycloaddition of 2-nitrosopyridine 48 with nitrile oxides can give either di-A -oxides such as 49 or 3-mono-A -oxides such as 50 (93JHC287). In general, greater electron withdrawing character in the aromatic substituent appears to favor formation of the di-A -oxides. Sulfur ylides such as compound 51 are obtained from aryl isothiocyanates and l-amino-2-methylthiopyridinium iodides (84JCS(P1)1891) nitrogen ylides can be obtained from a similar reaction (86H(24)3363). 

The cycloaddition of alkynes and alkenes to nitrile oxides has been used in the synthesis of functionalised azepine systems <96JHC259>, <96T5739>. The concomitantly formed isoxazole (dihydroisoxazole) ring is cleaved by reduction in the usual way. Other routes to 1-benzazepines include intramolecular amidoalkylation <96SC2241> and intramolecular palladium-catalysed aryl amination and aryl amidation <96T7525>. Spiro-substituted 2-benzazepines have been prepared by phenolic oxidation (Scheme 5) <96JOC5857> and the same method has been applied to the synthesis of dibenzazepines <96CC1481>. 

A series of 3-substituted-2-isoxazoles are prepared by the following simple procedure in situ conversion of nitroalkane to the silyl nitronate is followed by 1,3-dipolar cycloaddition to produce the adduct, which undergoes thermal elimination during distillation to furnish the isoxazole (Eq. 8.74). 5 Isoxazoles are useful synthetic intermediates (discussed in the chapter on nitrile oxides Section 8.2.2). Furthermore, the nucleophilic addition to the C=N bond leads to new heterocyclic systems. For example, the addition of diallyl zinc to 5-aryl-4,5-dihydroi-soxazole occurs with high diastereoselectivity (Eq. 8.75).126 Numerous synthetic applications of 1,3-dipolar cycloaddition of nitronates are summarized in work by Torssell and coworker.63a... 

The oxidation of aromatic aldoximes with ceric ammonium nitrate produces nitrile oxides which undergo subsequent cycloaddition to nitriles to produce 1,2,4-oxadiazoles (Equation 47) <1997PJC1093>. The anodic oxidation of aromatic aldoximes in the presence of acetonitrile has been reported to give low yields of either 3-aryl-5-methyl-1,2,4-oxadiazoles (2-25%) or 3,5-bis-aryl-l,2,4-oxadiazoles (6-28%), although the synthetic utility of this route is limited by competitive deoximation to the carbonyl being the major reaction pathway <1997MI3509>. 

Formation of mixtures of the above type, which is common with internal olefins, do not occur with many functionalized alkenes. Thus, tertiary cinnamates and cinnamides undergo cycloadditions with benzonitrile oxides to give the 5-Ph and 4-Ph regioisomers in a 25-30 75-70 ratio. This result is in contrast to that obtained when methyl cinnamate was used as the dipolarophile (177). 1,3-Dipolar cycloaddition of nitrile oxides to ethyl o -hydroxycinnamate proceeds regiose-lectively to afford the corresponding ethyl fra s-3-aryl-4,5-dihydro-5-(2-hydro-xyphenyl)-4-isoxazolecarboxylates 36 (178). Reaction of 4-[( )-(2-ethoxycarbo-nylvinyl)] coumarin with acetonitrile oxide gives 37 (R = Me) and 38 in 73% and 3% yields, respectively, while reaction of the same dipolarophile with 4-methoxy-benzonitrile oxide affords only 37 (R = 4-MeOCr>H4) (85%) (179). 

The cycloaddition of nitrile oxides RCNO (R = alkyl, alkenyl, aryl), generated in situ from either RCH2NO2/PI1NCO or RCH=NOH/NaOCl to (R)-( + )-limonene, proceeds regioselectively at the extracyclic double bond, but not stereospecifically, to form (5R/S )-isoxazoles 78 in 64% to 81% isolated yield (241). 

Some features are characteristic of reactions of nitrile oxides with 2,4,6-cyclo-hep tatrien-l-imines (8-azaheptafulvenes). 1,3-Dipolar cycloaddition to the C=N double bond of N-aryl-2,4,6-cycloheptatrien-l-imines 142 (R = Ar), affording... 

The carbon-nitrogen triple bond of aryl thiocyanates acts as a dipolarophile in 1,3-dipolar cycloadditions. Reactions with nitrile oxides yield 5-arylthio-1,2,4-oxadiazoles 227 (X = O Y = S). Aryl selenocyanates behave similarly forming 5-arylseleno-l,2,4-oxadiazoles 227 (X = 0 Y = Se). Reactions of 5-aryl-... 

Aryl-5-cyano-2-isoxazolines, possessing liquid crystal properties (smectic phases A or E) have been synthesized, 1,3-dipolar cycloaddition of nitrile oxides to acrylonitrile being the key step (532). For example, nitrile 462 has been obtained in 66% yield from substituted benzaldoxime and acrylonitrile via in situ generated nitrile oxides. 

A more elaborate approach was taken by Kaffy et al. [94], The goal of the research was a series of compounds with greater stability and a higher affinity for endothelial cells within tumor vessels than CA-4, 7 however, the paper described a method that was purely synthetic. The synthetic strategy involved a 1,3-dipolar cycloaddition of a nitrile oxide 186 with a substituted aryl alkyne 187 to form the oxazole 188. 

Nitrile oxides are widely used as dipoles in cycloaddition reactions for the synthesis of various heterocyclic rings. In order to promote reactions between nitrile oxides and less reactive carbon nucleophiles, Auricchio and coworkers studied the reactivity of nitrile oxides towards Lewis acids. They observed that, in the presence of gaseous BF3, nitrile oxides gave complexes in which the electrophilicity of the carbon atom was so enhanced that it could react with aromatic systems, stereoselectively yielding aryl oximes 65 and 66 (Scheme 35). ... 

Scheme 65) <60G1290>. Oxadiazolines (156) are produced by cycloaddition of cyanamides and nitrile oxides aryl (Scheme 66) <66JPR22l>. Thus, for un- and monosubstituted cyanamides, cycloaddition occurs to the C=N double bond of a tautomeric carbodiimide form rather than to a nitrile triple bond. On the other hand, dicyandiamide (157) and benzonitrile oxide furnish (158) (Scheme 67). 

Wilcox and co-workers (145) reported that the stereoselectivity of 1,3-dipolar cycloaddition reactions can be controlled in a predictable manner when ion pairs are located at a proper position near the reaction site (Scheme 11.40). He has employed an A-phenylmaleimide substrate having a chiral center in the substituent at ortho position of the phenyl group. Due to serious steiic hindrance, this phenyl group suffers hindered rotation around the aryl-nitrogen bond (rotation barrier 22 kcal/mol). Four diastereomeric cycloadducts are possible in the cycloaddition step with a nitrile oxide. When the cycloaddition reaction is carried out in... 

---