Aromatic polymers, high-temperature

Aliphatic or side-chain aromatic hydrocarbon polymers (polyolefins and polystyrene) give no char while the CR percentage of main-chain aromatic, condensed aromatic, heterocyclic (high-temperature) polymers may be as high as 70%. Halogen-containing polymers are outside the scope of the above relation. 

Imai, Y. Synthesis of novel organic-soluble high-temperature aromatic polymers. High Perfom. Polym. 7(3), 337-345 (1995). 

Miscellaneous Applications. Ben2otrifluoride derivatives have been incorporated into polymers for different appHcations. 2,4-Dichloroben2otrifluoride or 2,3,5,6-tetrafluoroben2otrifluoride [651-80-9] have been condensed with bisphenol A [80-05-7] to give ben2otrifluoride aryl ether semipermeable gas membranes (336,337). 3,5-Diaminoben2otrifluoride [368-53-6] and aromatic dianhydrides form polyimide resins for high temperature composites (qv) and adhesives (qv), as well as in the electronics industry (338,339). 

Carboxyhc acids react with aryl isocyanates, at elevated temperatures to yield anhydrides. The anhydrides subsequently evolve carbon dioxide to yield amines at elevated temperatures (70—72). The aromatic amines are further converted into amides by reaction with excess anhydride. Ortho diacids, such as phthahc acid [88-99-3J, react with aryl isocyanates to yield the corresponding A/-aryl phthalimides (73). Reactions with carboxyhc acids are irreversible and commercially used to prepare polyamides and polyimides, two classes of high performance polymers for high temperature appHcations where chemical resistance is important. Base catalysis is recommended to reduce the formation of substituted urea by-products (74). 

Two propylene oxide elastomers have been commercialized, PO—AGE and ECH—PO—AGE. These polymers show excellent low temperature flexibihty and low gas permeabihty. After compounding, PO—AGE copolymer is highly resiUent, and shows excellent flex life and flexibiUty at extremely low temperatures (ca —65°C). It is slightly better than natural mbber in these characteristics. Resistance to oil, fuels, and solvents is moderate to poor. Wear resistance is also poor. Unlike natural mbber, PO—AGE is ozone resistant and resistant to aging at high temperatures. The properties of compounded ECH—PO—AGE he somewhere between those of ECH—EO copolymer and PO—AGE copolymer (22). As the ECH content of the terpolymer increases, fuel resistance increases while low temperature flexibihty decreases. Heat resistance is similar to ECH—EO fuel resistance is similar to polychloroprene. The uncured mbber is soluble in aromatic solvents and ketones. 

Most polyesters (qv) are based on phthalates. They are referred to as aromatic-aHphatic or aromatic according to the copolymerized diol. Thus poly(ethylene terephthalate) [25038-59-9] (PET), poly(butyelene terephthalate) [24968-12-5] (PBT), and related polymers are termed aromatic-aHphatic polyester resins, whereas poly(bisphenol A phthalate)s are called aromatic polyester resins or polyarylates PET and PBT resins are the largest volume aromatic-aHphatic products. Other aromatic-aHphatic polyesters (65) include Eastman Kodak s Kodar resin, which is a PET resin modified with isophthalate and dimethylolcyclohexane. Polyarylate resins are lower volume specialty resins for high temperature (HDT) end uses (see HeaT-RESISTANT POLYAffiRS). 

Polyamide or polyimide polymers are resistant to aliphatic, aromatic, and chlorinated or fluorinated hydrocarbons as well as to many acidic and basic systems but are degraded by high-temperature caustic exposures. 

The common feature of the p-phenylene group stiffens the polymer backbone so that the polymers have higher TgS than similar polymers which lack the aromatic group. As a consequence the aromatic polymers tend to have high heat deformation temperatures, are rigid at room temperature and frequently require high processing temperatures. 

Although the structure is polar much of the polarity is frozen in at normal service temperatures. In such conditions electrical insulation properties are quite good even at high frequencies. As with many aromatic polymers, tracking resistance leaves something to be desired. 

Organic polymers provide one of the most versatile groups of materials and have widespread uses. Due to some inherent deficiencies, mainly poor heat and flame resistance, these materials suffer from limitations in certain areas of application. The resistance of polymers to high temperatures and flame may be increased by the incorporation of both aromatic rings and certain chemical elements in the polymer chain. It has been found that phosphorus, present either as a constituent in the polymer chain or incorporated as an additive in the form of a phosphorus compound to the polymer system, can make polymers flame retardant [109]. 

Improved polyurethane can he produced hy copolymerization. Block copolymers of polyurethanes connected with segments of isobutylenes exhibit high-temperature properties, hydrolytic stability, and barrier characteristics. The hard segments of polyurethane block polymers consist of 4RNHCOO)-n, where R usually contains an aromatic moiety. 

The high-temperature glassy or crystalline transitions of the linear aromatic and heterocyclic polymers were an important drawback for die structural aerospace applications, which need a good flow for the adhesive or composite formulations. 

---