Aramid fibers properties

Nomex is another aramid fiber Kevlar and Nomex differ only in that the substitution pattern in the aromatic rings is para in Kevlar but meta in Nomex Nomex is best known for its fire resistant properties and is used in protective clothing for fire fighters astronauts and race car drivers... 

Table 12. Properties of Commercial Aramid Fibers Compared to Nylon-6,6 ...

Fig. 4. Specific properties of reinforcing fibers for composite materials. K-29 and K-49 represent Kevlar aramid fibers. Other designations are explained...

Aramid Fibers. Aromatic polyamide fibers exhibiting a range of mechanical properties are available from several manufacturers, perhaps the best known being Du Pont s proprietary fiber Kevlar. These fibers possess many unique properties, such as high specific tensile strength and modulus (see Fig. 4). Aramid fibers have good chemical resistance to water, hydrocarbons, and solvents. They also show excellent flame retardant characteristics (see High PERFORMANCE fibers Polyamdes). 

Fluoroelastomers Novikova et al. [32] reported unproved physico-mechanical properties of fluoro mbbers by reinforcement with chopped polyamide fibers. Other fiber reinforcements are covered by Grinblat et al. [33]. Watson and Francis [34] described the use of aramid (Kevlar) as short fiber reinforcement for vulcanized fluoroelastomer along with polychloroprene mbber and a co-polyester TPE in terms of improvement in the wear properties of the composites. Rubber diaphragms, made up of fluorosilicone mbbers, can be reinforced using aramid fiber in order to impart better mechanical properties to the composite, though surface modification of the fiber is needed to improve the adhesion between fluorosUicone mbber and the fiber [35]. Bhattacharya et al. [36] studied the crack growth resistance of fluoroelastomer vulcanizates filled with Kevlar fiber. 

Aramid fibers, 13 372-373, 395 asbestos substitute, 3 314t chemical resistance of, 19 731t consumption of, 19 735t mechanical properties of, 13 376 properties of, 1.9 729-7301 as reinforcement materials, 26 756, 760 Aramid films/papers, properties of, 1.9 7331 Aramid polymer device, 16 1 Aramid products, economic aspects of,... 

Kalanta J. and Drzal L.T. (1990a). Structural properties of aramid fibers and their influence on fiber adhesion. In Proc. ICC/-2, Controlled Interphases in Composite Materials (H. Ishida ed.), Elsevier, New York, pp. 685 690. 

Composite In polymer technology a combination of a polymeric matrix and a reinforcing fiber with properties that the component materials do not have. The most common matrix resins are unsaturated thermosetting polyesters and epoxies, and reinforcing fibers are glass, carbon, and aramid fibers. The reinforcing fibers may be continuous or discontinuous. Some matrix resins are thermoplastics. 

---