AMOTT

Rider and Amott were able to produce notable improvements in bond durability in comparison with simple abrasion pre-treatments. In some cases, the pretreatment improved joint durability to the level observed with the phosphoric acid anodizing process. The development of aluminum platelet structure in the outer film region combined with the hydrolytic stability of adhesive bonds made to the epoxy silane appear to be critical in developing the bond durability observed. XPS was particularly useful in determining the composition of fracture surfaces after failure as a function of boiling-water treatment time. A key feature of the treatment is that the adherend surface prepared in the boiling water be treated by the silane solution directly afterwards. Given the adherend is still wet before immersion in silane solution, the potential for atmospheric contamination is avoided. Rider and Amott have previously shown that such exposure is detrimental to bond durability. 

Figure 8. The Walkinshaw Amott model [46] for solid calcium pectate, with the galacturonan chains in the right-handed (ii) helical conformation.

Interpretation of NMR well logs is usually made with the assumption that the formation is water-wet such that water occupies the smaller pores and oil relaxes as the bulk fluid. Examination of crude oil, brine, rock systems show that a mixed-wet condition is more common than a water-wet condition, but the NMR interpretation may not be adversely affected [47]. Surfactants used in oil-based drilling fluids have a significant effect on wettability and the NMR response can be correlated with the Amott-Harvey wettability index [46]. These surfactants can have an effect on the estimation of the irreducible water saturation unless compensated by adjusting the T2 cut-off [48]. 

S. Amott, in S. Amott and D. A. Rees (Eds.), Glycosaminoglycan Assemblies in the Extracellular Matrix, Humana Press, Clifton, 1984. 

---