Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amines palladium-catalyzed alkylation

The current experiment involves the preparation of the sterically hindered amine A -ferf-butyl-3,5-dimethylaniline. Other preparations of this amine involve addition of methyllithium to lV-3,5-dimethylphenylacetone imine and the reaction of l-bromo-2,4-dimethylbenzene with terf-butylamine either via aryne formation or by palladium-catalyzed alkylation. The current method, the reaction of tert-butylamine with the 2,4,6-trimethylpyrylium cation, involves inexpensive starting materials and proceeds in high yield. The molybdenum(III) complex of the deprotonated form of this amine, Mo[N(f-Bu)(3,5-C6H3Me2)]3, splits the N=N triple bond in N2 to afford molybdenum(VI) nitrido products. This latter reaction is the key step in the recently discovered catalytic process to convert N2 to ammonia under ambient conditions. [Pg.245]

In conclusion, N,N -dialkyl-N,N -di(l-deoxyglucityl)alkylenediamines (2) are prepared in good yield and purity by palladium-catalyzed reductive coupling of straight chain N-alkyl-(l-deoxyglucityl)amines with glyoxal. A wide variety of 2 with moderate to high hydrophobicity is readily accessible. [Pg.174]

Phosphine ligands based on the ferrocene backbone are very efficient in many palladium-catalyzed reactions, e.g., cross-coupling reactions,248 Heck reaction,249 amination reaction,250 and enantioselective synthesis.251 A particularly interesting example of an unusual coordination mode of the l,l -bis(diphenylphosphino)ferrocene (dppf) ligand has been reported. Dicationic palladium(II) complexes, such as [(dppf)Pd(PPh3)]2+[BF4 ]2, were shown to contain a palladium-iron bond.252,253 Palladium-iron bonds occur also in monocationic methyl and acylpalladium(II) complexes.254 A palladium-iron interaction is favored by bulky alkyl substituents on phosphorus and a lower electron density at palladium. [Pg.575]

With the exception of intramolecular amination reactions, all of the early aryl halide aminations were catalyzed by palladium complexes containing the sterically hindered P(o-tol)3. In papers published back-to-back in 1996, amination chemistry catalyzed by palladium complexes of DPPF and BINAP was reported.36,37 These catalysts allowed for the coupling of aryl bromides and iodides with primary alkyl amines, cyclic secondary amines, and anilines. [Pg.372]

A variety of triazole-based monophosphines (ClickPhos) 141 have been prepared via efficient 1,3-dipolar cycloaddition of readily available azides and acetylenes and their palladium complexes provided excellent yields in the amination reactions and Suzuki-Miyaura coupling reactions of unactivated aryl chlorides <06JOC3928>. A novel P,N-type ligand family (ClickPhine) is easily accessible using the Cu(I)-catalyzed azide-alkyne cycloaddition reaction and was tested in palladium-catalyzed allylic alkylation reactions <06OL3227>. Novel chiral ligands, (S)-(+)-l-substituted aryl-4-(l-phenyl) ethylformamido-5-amino-1,2,3-triazoles 142,... [Pg.229]

Kuroda and Suzuki used reaction of 267a with 2-bromoaniline leading to anilide 312 as the first step of their sequence in the preparation of 1H-imidazo[4,5-c]quinolin-4(5//)-ones (Scheme 77) (91TL6915). Reaction of 267a with amines usually does not require any catalyst and/or base, but in this case use of sodium hydride was reported. The anilide 312 was sequentially alkylated, first with methyl iodide in ethanol with potassium hydroxide at room temperature and then with different alkyl iodides in acetone at reflux to provide intermediate 313. This compound was then cyclized via palladium catalyzed reaction leading to product 314. This reaction provides a new entry to l//-imidazo[4,5-c]quinolin-4(5//)-ones that are of current interest as antiasthmatic agents. [Pg.199]

Although there have been few new developments in the period since 1993, halogenopyrazines 42 have been convenient precursors for a variety of pyrazine derivatives. For example, the halogenopyrazines 42 are cyanated by palladium-catalyzed cross-coupling with alkali cyanide or by treatment with copper cyanide in refluxing picoline, to yield cyanopyrazines 48. Alkoxypyrazines 49 are produced by treatment with alkoxide-alcohol, and aminopyrazines 50 are prepared by amination with ammonia or appropriate amines. The nucleophilic substitution of chloropyrazine with sodium alkoxide, phenoxide, alkyl- or arylthiolate is efficiently effected under focused microwave irradiation <2002T887>. [Pg.287]

The 2,3-dichloro-4-hydroxyphenyl derivative of aripiprazole was prepared to confirm the structure of a primary metabolite of aripiprazole (Scheme 21). The synthesis began with the protection of 4-bromo-2,3-dichlorophenol as its benzyl ether 71. Palladium-catalyzed amination of 71 with piperazine proceeded regioselectively in excellent yield. Alkylation of the piperazine 72 with 69 in the presence of K2CO3 and... [Pg.107]

The reaction sequence starts by anchoring 2,6-dichloropurine onto the sohd-phase PAT, -amine at the more reactive C6 position with exclusive regioselectivity. A multitude of PAL-amine resins 59 can be prepared ahead by reductive amination of commercial (4-formyl-3,5-dimethoxyphe-noxy)-methylpolystyrene. The N9 position of the purine (60) may be modified by Mitsunobu alkylation. The final derivatization step involves a palladium-catalyzed cross-coupling reaction in position 2. This reaction... [Pg.449]

The most conspicuous property of aliphatic amines, apart from their fishy smell, is their high basicity, which usually precludes N-alkylations under acidic reaction conditions (last reaction, Scheme 6.3). Hence, alkylation of amines with tertiary alkyl groups is not usually possible without the use of highly stabilized carbocations which can be formed under basic reaction conditions. Rare exceptions are N-alkyla-tions of amines via radicals (Scheme 4.2), copper-catalyzed propargylations (Scheme 6.3), and the addition of amines to some Michael acceptors and allyl palladium or iridium complexes. Better strategies for the preparation of tert-alkylamines include the addition of Grignard reagents to ketone-derived imines [13] or the reduction of tert-alkyl nitro compounds. [Pg.231]

Palladium chemistry has been used in the synthesis of tetrahydroisoquinolines. Different combinations of iodoaryl-amine-alkene can be used in these multicomponent reactions. For example, the metal-mediated o-alkylated/alkenyl-ation and intramolecular aza-Michael reaction (Scheme 109) give moderate yields of heterocycle <2004TL6903>, whereas the palladium-catalyzed allene insertion-nucleophilic incorporation-Michael addition cascade (Equation 172) produces good yields of tetrahydroisoquinolines in 15 examples <2003TL7445> with further examples producing tetrahydroquinolines (Scheme 110) <2000TL7125>. [Pg.285]

Most recently, Wagaw, Yang, and Buchwald published a full account of the synthesis of indoles using the palladium-catalyzed amination process [185]. From the standpoint of catalysis, new results included improved turnover numbers and rates when Xantphos was used as ligand. Moreover, this ligand allowed diarylation of the hydrazone, including a one-pot sequential diarylation to provide mixed diaryl hydrazones. A procedure for the alkylation of N-aryl hydrazones was also reported. These procedures allow the formation of N-aryl and N-alkyl indoles after subjecting the products to Fischer conditions for indole synthesis. [Pg.133]

A palladium-catalyzed /V-alkylation (Buchwald-Hartwig amination) of pyrroles with cyclic p-chloroenals, was reported <07S1571>. [Pg.128]

Palladium-catalyzed regioselective hydroamination of 2,3-dihydrofuran under ligand-free and neutral conditions was found to be general with secondary alkyl amines, as exemplified in Equation (119) <2001T5445>. [Pg.462]

The stereochemistry of Pd -catalyzed allylic alkylation is net retention (equation 62). This arises from sequential inversion steps. Initially, the Pd approaches from the face of the C3 unit opposite the leaving group, to form the jt-allyl complex. Subsequently, the nucleophile adds to the face of the TT-allyl opposite palladium. If a bulky or umeactive nucleophile is used with allylic acetates, the acetoxy group can add again to the complex. Ultimately, this results in the production of a mixture of stereoisomers upon nucleophihc addition. As an example of the range of allylic substrates that react, nitrogen nucleophiles, in particular primary and secondary amines, undergo palladium-catalyzed substimtion with aUyhc alcohols, acetates, and ethers (equation 63). [Pg.3575]

A copper(ii) oxide-catalyzed regioselective synthesis of 1-alkyl- and l-aryl-l//-indazoles from ortho-hzXogcnztcA alkanoylphenones, benzophenones, and arylcarboxylic acids with hydrazines in the presence of potassium carbonate has been developed <20070L525>. A palladium-catalyzed C-H activation/intramolecular amination reaction sequence provided a new route to 3-aryl/alkylindazoles <20070L2931>. [Pg.121]


See other pages where Amines palladium-catalyzed alkylation is mentioned: [Pg.535]    [Pg.258]    [Pg.393]    [Pg.179]    [Pg.696]    [Pg.188]    [Pg.106]    [Pg.777]    [Pg.566]    [Pg.484]    [Pg.275]    [Pg.68]    [Pg.500]    [Pg.161]    [Pg.55]    [Pg.510]    [Pg.339]    [Pg.268]    [Pg.10]    [Pg.239]    [Pg.113]    [Pg.148]    [Pg.148]    [Pg.95]    [Pg.314]    [Pg.329]    [Pg.144]    [Pg.246]    [Pg.69]    [Pg.530]    [Pg.558]   
See also in sourсe #XX -- [ Pg.288 ]




SEARCH



Alkylative amination

Alkyls palladium

Amines alkylation

Amines palladium-catalyzed

Palladium alkylation

Palladium amines

© 2024 chempedia.info