Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amines carbodiimides

Figure 15 Conjugation of a carboxylic add and an amine using the carbodiimide method. The carbodiimide activates the carboxyhc acid to speed up the reaction to the amine. Carbodiimides can be used with nonpolar or polar solvents, including water. Undesirable urea complexes may form as by-products. Details of the reaction are given in Table 3... Figure 15 Conjugation of a carboxylic add and an amine using the carbodiimide method. The carbodiimide activates the carboxyhc acid to speed up the reaction to the amine. Carbodiimides can be used with nonpolar or polar solvents, including water. Undesirable urea complexes may form as by-products. Details of the reaction are given in Table 3...
A series of pyrazolo[3,4- / pyrimidines 310 were obtained via reacting carbodiimide 308 with amines. Carbodiimide 308 was obtained by teacting ester 306 with triphenylphosphine and bromine, and then reacting the so-formed 307 with phenyl isocyanate. The intermediacy of 309 is suggested (Scheme 23) <2004JHC393>. [Pg.637]

Another example of the synthesis of cross-hnked HA with a dihydrazide bridge is described in [29]. For a formation of the bond between hyaluronan and primary amine, carbodiimide and N-hydroxysulfosuccinimide were used. The authors synthesized many... [Pg.125]

ROMP NHS-substituted norbomene Mannose-amine Carbodiimide coupling Con-A None (linear polymer) [104]... [Pg.82]

The available free carboxyl groups of the DAS—HMS can be linked via a peptide bond to available primary amine groups onto highly antigenic carriers using a carbodiimide (19). The carriers used in this case were bovine semm albumin (BSA) and poly-L-lysine (molecular weight 150,000 to 300,000). The... [Pg.24]

Mechanism of amide formation by reaction of a carboxylic acid and an amine with dicyclohexyl-carbodiimide (DCC). [Pg.798]

Carbodiimides have been prepared by desulfurization of thioureas by metal oxides, by sodium hypochlorite,4 or by ethyl chloroformate in the presence of a tertiary amine by halogena-tion of ureas or thioureas followed by dehydrohalogenation of the N,N -disubstituted carbamic chloride 8 and by dehydration of disubstituted ureas using -toluenesulfonyl chloride and pyridine.7 The method described above is a modification of that of Campbell and Verbanc. ... [Pg.32]

Poly (ethylene oxide) macromonomers72 761 are made in a similar way, as the alkoxide end group is reactive enough towards benzylic halides. With methacryloyl chloride, side reactions are involved. It is better to first protonate the PEO, and then to have it react with methacryloyl chloride in the presence of some triethyl amine. One can also react co-hydroxy polyethylene oxide) with methacryloyl imidazole, or with methacrylic acid in the presence of dicyclohexyl carbodiimide (DCCf)77). [Pg.158]

PGIP, purified fi om P.vulgaris hypocotyls [11], was immobilized to the sensor ch via amine coupling. A continuous flow of HBS buffer (5 pl/min) was mantained over the sensor surface. The carboxylated dextran matrix of the sensor surface was first activated by a 6-min injection of a mixture of N-hydroxy-succinimide and N-ethyl-N - (3-diethylaminopropyl) carbodiimide, followed by a 7-min injection of PGIP (lOng/pl in 10 mM acetate, pH 5.0). Hie immobilization procedure was con leted by a 7-min injection of 1 M ethanolamine hydrochloride to block the remaining ester groups. [Pg.776]

Like the carbodiimide method, the mixed anhydride method results in an amide complex (Table 5, Figure 17). The acid-containing hapten is dissolved in a dry, inert, dipolar, aprotic solvent such as p-dioxane, and isobutyl chloroformate is added with an amine catalyst. The activated mixed anhydride is chemically stable and can be isolated and characterized. The aqueous protein solution is added to the activated acid and the pH is maintained at around 8.5. A low temperature (around 10 °C) is necessary during the reaction to minimize side reactions. [Pg.641]

Figure 9 A synthetic mixture of water-soluble carboxylic acids separated by anion-exchange chromatography. Column 0.3 cm x 300 cm Diaoion CA 08, 16-20 p (Mitsubishi Kasei Kogyo). Eluant 200 mM HC1. Detection reaction with Fe3-benzohy-droxamic acid-dicyclohexy carbodiimide-hydroxylamine perchlorate-triethyl amine with absorbance at 536 nm. Analytes (1) aspartate, (2) gluconate, (3) glucuronate, (4) pyroglutamate, (5) lactate, (6) acetate, (7) tartrate, (8) malate, (9) citrate, (10) succinate, (11) isocitrate, (12) w-butyrate, (13) a-ketoglutarate. (Reprinted with permission from Kasai, Y., Tanimura, T., and Tamura, Z., Anal. Chem., 49, 655, 1977. 1977 Analytical Chemistry). Figure 9 A synthetic mixture of water-soluble carboxylic acids separated by anion-exchange chromatography. Column 0.3 cm x 300 cm Diaoion CA 08, 16-20 p (Mitsubishi Kasei Kogyo). Eluant 200 mM HC1. Detection reaction with Fe3-benzohy-droxamic acid-dicyclohexy carbodiimide-hydroxylamine perchlorate-triethyl amine with absorbance at 536 nm. Analytes (1) aspartate, (2) gluconate, (3) glucuronate, (4) pyroglutamate, (5) lactate, (6) acetate, (7) tartrate, (8) malate, (9) citrate, (10) succinate, (11) isocitrate, (12) w-butyrate, (13) a-ketoglutarate. (Reprinted with permission from Kasai, Y., Tanimura, T., and Tamura, Z., Anal. Chem., 49, 655, 1977. 1977 Analytical Chemistry).
The reaction of 1,4-disubstituted tetrazoliums (149) with aliphatic tertiary amines such as triethylamine leads via deprotonation to 150 followed by ring opening to form a carbodiimide (74) with the loss of nitrogen (Scheme 20).237,238 Under the same conditions, 1,4,5-trisubstituted... [Pg.246]

Reactions of 2,3-dioxo-l,2,3,5,6,7-hexahydropyrido[l,2,3-carboxylic acids and the homologous acetic and propionic acids, prepared by basic hydrolysis of the corresponding ester, with amines, 28% NH4OH, and hydroxylamine derivatives in the presence of l-ethyl-3-[3-(dimethylamino)propyl]carbodiimide and hydroxybenztria-zole <1995BML1527>, 1995BML1533>, and in the presence of NEt3 and A, A -bis(2-oxo-3-oxazolidinyl)phosphinic... [Pg.134]

The carbodiimide of choice used to couple cystamine to carboxylate- or phosphate-containing molecules is most often the water-soluble carbodiimide, EDC hydrochloride Chapter 3, Section 1.1). This reagent rapidly reacts with carboxylates or phosphates to form an active ester intermediate, which is highly reactive toward primary amines. The reaction is efficient from pH 4.7 to 7.5, and a variety of buffers may be used, providing they don t contain competing groups. [Pg.84]


See other pages where Amines carbodiimides is mentioned: [Pg.32]    [Pg.1187]    [Pg.1039]    [Pg.32]    [Pg.1187]    [Pg.1039]    [Pg.448]    [Pg.344]    [Pg.487]    [Pg.53]    [Pg.218]    [Pg.49]    [Pg.587]    [Pg.336]    [Pg.20]    [Pg.95]    [Pg.639]    [Pg.640]    [Pg.153]    [Pg.142]    [Pg.566]    [Pg.569]    [Pg.1038]    [Pg.231]    [Pg.466]    [Pg.899]    [Pg.491]    [Pg.522]    [Pg.453]    [Pg.224]    [Pg.364]    [Pg.262]    [Pg.330]    [Pg.255]    [Pg.43]    [Pg.44]    [Pg.62]    [Pg.84]    [Pg.87]   
See also in sourсe #XX -- [ Pg.176 ]

See also in sourсe #XX -- [ Pg.144 ]

See also in sourсe #XX -- [ Pg.144 ]




SEARCH



Amines with carbodiimides

Amines, reactions with carbodiimides

Carbodiimid

Carbodiimide

Carbodiimids

© 2024 chempedia.info