Amides acetanilide

Convert the amine (aniline) into an amide (acetanilide). 

Synonyms N-(3,4-Dichlorophenyl)propionamide 3,4-Dichloropropionanilide Dipram DCPA Propanide Grascide Chem-Rice Stampede Stam Chemical/Pharmaceutical/Other Class Herbi-cidal amide Acetanilide Chemical Formula C9H9CI2NO Chemical Structure ... 

Synthesis o-f N-subst i tuted amides. Acetanilide has been obtained by carbonylat ion o-f nitrobenzene in acetic acid, at T>300"C and 100 atm, with Ni[Pg.164]

Nitro compounds. Nitromethane Nitrobenzene ni-Dinitrobenzene. Amides and imides. Acetamide re-Caproamide Acetanilide Benz-anilide Phthalimide. 

Hydrolysis of a substituted amide. A. With 10 per cent, sulphuric acid. Reflux 1 g. of the compound (e.g., acetanilide) with 20 ml. of 10 per cent, sulphuric acid for 1-2 hours. Distil the reaction mixture and collect 10 ml. of distillate this will contain any volatile organic acids which may be present. Cool the residue, render it alkaline with 20 per cent, sodium hydroxide solution, cool, and extract with ether. Distil off the ether and examine the ether-soluble residue for an amine. 

In a useful extension to the Meth-Cohn quinoline synthesis, pyridoquinolin-2-ones 27 are readily prepared in a one-pot procedure by sequential treatment of an acetanilide 3, firstly with the Vilsmeier reagent from DMF and POCI3 to afford the intermediate 16, which is then further reacted in situ with another secondary amide. ... 

Samal et al. [25] reported that Ce(IV) ion coupled with an amide, such as thioacetamide, succinamide, acetamide, and formamide, could initiate acrylonitrile (AN) polymerization in aqueous solution. Feng et al. [3] for the first time thoroughly investigated the structural effect of amide on AAM polymerization using Ce(IV) ion, ceric ammonium nitrate (CAN) as an initiator. They found that only acetanilide (AA) and formanilide (FA) promote the polymerization and remarkably enhance Rp. The others such as formamide, N,N-dimethylformamide (DMF), N-butylacetamide, and N-cyclohexylacetamide only slightly affect the rate of polymerization. This can be shown by the relative rate (/ r), i.e., the rate of AAM polymerization initiated with ceric ion-amide divided by the rate of polymerization initiated with ceric ion alone. Rr for CAN-anilide system is approximately 2.5, and the others range from 1.04-1.11. 

Another useful aniline derivative is acetanilide, which is simply the amide formed from aniline and acetic arid ... 

Except for simple aromatic amides such as benzamide and acetanilide, derivatization is recommended. The most common derivatives used in this laboratory are TMS, acetate, and /V-dimeth-ylaminomethylene (for primary amides). 

Our recent studies on effective bromination and oxidation using benzyltrimethylammonium tribromide (BTMA Br3), stable solid, are described. Those involve electrophilic bromination of aromatic compounds such as phenols, aromatic amines, aromatic ethers, acetanilides, arenes, and thiophene, a-bromination of arenes and acetophenones, and also bromo-addition to alkenes by the use of BTMA Br3. Furthermore, oxidation of alcohols, ethers, 1,4-benzenediols, hindered phenols, primary amines, hydrazo compounds, sulfides, and thiols, haloform reaction of methylketones, N-bromination of amides, Hofmann degradation of amides, and preparation of acylureas and carbamates by the use of BTMA Br3 are also presented. 

Substituted amides suffer hydrolysis with greater difficulty. The choice of an acid or an alkaline medium vill depend upon (a) the solubility of the compound in the medium and (b) the effect of the reagent upon the products of hydrolysis. Substituted amides of comparatively low molecular weight (e.g., acetanilide) may be hydrolysed by boiling either with 10 per cent, sodium hydroxide solution or with 10 per cent, sulphuric acid for 2-3 hours. Other substituted amides are so insoluble in water that little reaction occurs when they are refluxed with dilute acid or dilute alkali for several hours. These include such substances as benzanilide (C(H(CONHC,Hg) and the benzoyl derivative of a naphthylamine (C.HjCONHCioH,) or a toluidine (C gCONHCjH,). For these substances satisfactory results may be obtained with 70 per cent, sulphuric acid this hydrolysis medium is a much better solvent for the substituted amide than is water or more dilute acid it also permits a higher reaction temperature (compare Section IV 192) ... 

Catalysed oxidation of primary and secondary amines generally has little synthetic value. Primary amines yield either a mixture of nitriles and amides (ca. 30%) or, in the case of arylamines, the azo derivatives (42-99%) [39], Symmetrical and non-symmetrical azoarenes are also produced in good yields ( 60%) from the reaction of acetanilides with nitroarenes under basic solidtliquid conditions, although higher yields are obtained using TDA-1 [40],... 

The electrochemical cyclization reaction is less successful with the N-(3-phenylallyl)acetanilide 60 which has two potential bond cleavage sites from the radical-anion [173]. Carbon-nitrogen bond cleavage with loss of a 3-phenylallyl radical, leaving an amide nitrogen anion, is favoured over carbon-chlorine bond cleavage. 

---