Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Copper aluminium alloys

Almond shell Aluminium, atomized Aluminium, flake Aluminium-cobalt alloy Aluminium-copper alloy Aluminium-iron alloy Aluminium-lithium alloy Aluminium—magnesium alloy Aluminium-nickel alloy Aluminium-silicon alloy Aluminium acetate... [Pg.134]

A convenient method to produce powdered skeletal catalysts is to use the procedure described by Freel and co-workers [16] for Raney nickel. The same relative proportions of alloy and leachant can be used to maintain the leach reaction relatively isothermal when larger quantities of catalyst are desired. In their method an aqueous solution containing 40wt% NaOH is added stepwise to 30 g of alloy powder and 150 ml of distilled water in a vessel at 313 K. Alkali additions arc made at approximately 2-min intervals. For the first 20-min period the volume of alkali added is 2 ml, and 5-ml additions are made thereafter. A reaction time of around 3 h is sufficient to fully leach 500-jim particles of aluminium-nickel or aluminium-copper alloys at 313 K. After extraction the catalysts are washed with distilled water at ambient temperature, first by decantation and then by water flow in a vessel until the pH is lowered to around 9. The samples can then be stored in... [Pg.27]

Binary aluminium-copper alloys—the study of tho part... [Pg.74]

Ternary zinc -aluminium-copper alloys containing 2 % of... [Pg.84]

The first three refer to aluminium-copper alloys. These alloys contain the constituent ij (this being, as we have seen, pure aluminium or a solid solution of copper and aluminium with a very low content of copper) plus the eutectic (CuAlj+j ). [Pg.86]

The yield strength of an aluminium-copper alloy is to be increased by precipitation hardening by Ai po,2 = 600 MPa. [Pg.415]

Baldwin, K.R., P.L. Lane, MA.H. Hewins and C.J.E. Smith, 1987, Metallic Cations as Corrosion Inhibitors for Aluminium-Copper Alloys, Royal Aircraft Establishment Technical Report 87052, September (UK Ministry of Defence). [Pg.90]

THE EFFECT OF THERMOMECHAMCAL AGEING OF ALUMINIUM-COPPER ALLOY (MATLAB APPROACH)... [Pg.239]

The Effect of Thermomechanical Ageing of Aluminium-Copper Alloy... [Pg.692]

Skeldon R, Thompson G.E., Wood G.C., Zhou X., Habazaki H. and Shimizu K. (1997), Evidence of oxygen bubbles formed within anodic films on aluminium-copper alloys , Phil. Mag. A,16,129. ... [Pg.161]

The planking sheets had been riveted with copper alloy rivets on steel frames. As a result, intense galvanic corrosion led to severe damage to the sheets in aluminium-copper alloy, which is already by itself highly prone to corrosion. [Pg.335]


See other pages where Copper aluminium alloys is mentioned: [Pg.217]    [Pg.220]    [Pg.657]    [Pg.663]    [Pg.127]    [Pg.687]    [Pg.127]    [Pg.299]    [Pg.1027]    [Pg.74]    [Pg.253]    [Pg.690]    [Pg.696]   
See also in sourсe #XX -- [ Pg.4 , Pg.13 , Pg.17 , Pg.18 ]

See also in sourсe #XX -- [ Pg.4 , Pg.13 , Pg.17 , Pg.18 ]




SEARCH



Alloyed Aluminium

Aluminium alloys

Aluminium-copper alloys phase diagram

Aluminium-copper alloys stress-corrosion cracking

Aluminium-copper-magnesium alloys

Aluminium-zinc-magnesium-copper alloys

Copper 12 , aluminium

Copper alloys

Hardness: Brinellof aluminium-copper-zinc alloy high temperatures

The age-hardening of copper-aluminium alloys

© 2024 chempedia.info