Alkynes three-component couplings

Three-component coupling with vinylstannane. norbornene (80). and bro-mobenzene affords the product 91 via oxidative addition, insertion, transme-tallation, and reductive elimination[85]. Asymmetric multipoint control in the formation of 94 and 95 in a ratio of 10 1 was achieved by diastereo-differ-entiative assembly of norbornene (80), the (5 )-(Z)-3-siloxyvinyl iodide 92 and the alkyne 93, showing that the control of four chiralities in 94 is possible by use of the single chirality of the iodide 92. The double bond in 92 should be Z no selectivity was observed with E form[86]. 

The coupling reactions of alkynes and aldehydes catalyzed by iron(III) salts have been discussed above (Scheme 10, routes B and C). The three-component coupling of aldehydes, alkynes, and amines is equivalent to the coupling reaction between alkynes and imines. Wang et al. reported such a three-component coupling catalyzed by FeCls in the absence of any ligand (Scheme 17) [33]. 

Scheme 17 Iron-catalyzed three-component coupling reactions of aldehydes, terminal alkynes, and amines...

Recently, the three-component couplings of a-oxyaldehydes, alkynes, and amines in water were investigated by using gold, silver, and copper... 

Recently, Larock and coworkers used a domino Heck/Suzuki process for the synthesis of a multitude of tamoxifen analogues [48] (Scheme 6/1.20). In their approach, these authors used a three-component coupling reaction of readily available aryl iodides, internal alkynes and aryl boronic acids to give the expected tetrasubsti-tuted olefins in good yields. As an example, treatment of a mixture of phenyliodide, the alkyne 6/1-78 and phenylboronic acid with catalytic amounts of PdCl2(PhCN)2 gave 6/1-79 in 90% yield. In this process, substituted aryl iodides and heteroaromatic boronic acids may also be employed. It can be assumed that, after Pd°-cata-lyzed oxidative addition of the aryl iodide, a ds-carbopalladation of the internal alkyne takes place to form a vinylic palladium intermediate. This then reacts with the ate complex of the aryl boronic acid in a transmetalation, followed by a reductive elimination. 

A three-component coupling was used to prepare a series of 1,4-disubstituted-l,2,3-triazoles 129 from the corresponding acetylated Baylis-Hillman adducts 127, sodium azide and terminal alkynes 128 <06TL3059>. This same reaction was also carried out in either water or in... 

Nickel(O) catalysis has been utilized for a three-component coupling between an allylic electrophile, and alkyne, and AlMe3 or ZnMe2. This reaction takes place though the insertion of a 7r-nickel(ll) intermediate into the alkyne,... 

Finally, Odom and co-workers reported a titanium-catalyzed three-component coupling between primary amines, alkynes, and isonitriles for the preparation of a, 3-unsaturatcd /3-iminoamines in good yields (Scheme 35).121 Beside the three-component coupling product, an. V,.V-disubstituted formamidine and an imine were also identified as minor... 

Based on the established mechanism for titanium-catalyzed hydroamination, the authors propose a reversible reaction between a titanium imide complex and the alkyne to form metalloazacyclobutene 86, which in turn undergoes 1,1-insertion of the isonitrile into the Ti-C bond. The generated five-membered ring iminoacyl-amido complex 87 with the new C-C bond is protonated by the primary amine to afford the desired three-component coupling product, with regeneration of the catalytic imidotitanium species. Very recently, titanium-catalyzed carbon-carbon bond-forming reactions have been reviewed.122... 

Indium-Catalyzed, Three-Component Coupling Reactions of Aldehydes, Amines and Alkynes 253... 

When the secondary amine 33 was used instead of a primary amine, a different type of three-component coupling reaction took place with aldehyde 34 and 1-alkynes 35 to afford the corresponding allylamines (36 and 37) [22]. In this reaction, Ir-hydride generated by amine (33) with Ir, would be a key intermediate. The reaction may proceed by addition of the Ir-hydride to the enamine derived from amine 33 and alkyne 34, followed by insertion of aldehyde and dehydration to give the coupling product (36 and 37). 

Blechert reported a skillful method of cross-enyne metathesis. Solid-supported alkyne 139 is reacted with alkene in the presence of Ic to give 140. For cleavage of 1,3-diene from solid-supported product 140 having an allyl acetate moiety, palladium-catalyzed allylic substitution is used. Thus, 140 is treated with Pd(PPh3)4 in the presence of methyl malonate to afford three-component coupling product 141 in good yield ... 

The Lee group originated rhodium alkenylidene-mediated catalysis by combining acetylide/alkenylidene interconversion with known metal vinylidene functionalization reactions [31], Thus, the first all-intramolecular three-component coupling between alkyl iodides, alkynes, and olefins was realized (Scheme 9.17). Prior to their work, such tandem reaction sequences required several distinct chemical operations. The optimized reaction conditions are identical to those of their original two-component cycloisomerization of enynes (see Section 9.2.2, Equation 9.1) except for the addition of an external base (Et3N). Various substituted [4.3.0]-bicyclononene derivatives were synthesized under mild conditions. Oxacycles and azacycles were also formed. The use of DMF as a solvent proved essential reactions in THF afforded only enyne cycloisomerization products, leaving the alkyl iodide moiety intact. 

A concise total synthesis of dehydrohomoancepsenolide is achieved in an optically active form. The key steps are alkene metathesis and alkyne metathesis. A three-component coupling reaction affords dienyne 137, which undergoes ring-closing alkene metathesis in the presence of the first-generation ruthenium carbene complex to give 138,... 

A novel microwave-mediated three-component coupling of a-acyl bromides, pyridine and internal alkynes was carried out in the absence of a solvent on activated basic alumina to provide a collection of indolizines (Scheme 3.5)7. It was proposed that the reaction proceeded via in situ generation of a dipole from an N-acyl pyridinium salt, followed by a [3+2] cycloaddition reaction. A dedicated laboratory microwave system was... 

Patel and Jamison [40] reported a catalytic three-component coupling of alkynes, imines, and triethylborane using a Ni complex and (S)-(+)-(neomenthyl)diphenyl-phosphane [(S)-NMDPP] 159 forming the alkylative coupling product (Scheme 9.28). No yields were reported. 

The Pd-catalysed three-component coupling of readily available aryl iodides (53), internal alkynes (54), and arylboronic acids (55) has been developed as a one-step, regio- and stereo-selective route to tetrasubstituted alkenes (56) in good to excellent yields, although electron-poor aryl iodides and dialkylalkynes normally afford only low yields under standard reaction conditions. The right combination of substrates and reaction conditions has been shown to be important for attaining high yields. The presence of water substantially increased the yields of the desired tetrasubstituted... 

Solvent-Free Three-Component Coupling of Aldehyde, Alkyne and Amine 213... 

Li and coworkers have reported a novel silver-catalyzed, three-component coupling of an aldehyde, an amine, and an alkyne, and the first example of a direct addition of a silver acetylide to an aldehyde to produce propargylic alcohols (Scheme 1.41).103-105 Treatment of an aldehyde with a silver halide and secondary amine gave propargylic amines in good yields in organic solvent, water, or ionic liquids. The proposed mechanism suggests addition of a silver acetylide to the iminium ion formed in situ. 

In a closely related reaction, Li et al.101 devised a silver-catalyzed three-component coupling between aldehydes, alkynes, and amines. This transformation was really efficient in water and in an ionic liquid, although both required overnight heating at 100°C (Table 10.6). In this reaction, a silver acetylide that was sufficiently nucleophilic to add to the iminium ion that formed by condensation of the amine on the aldehyde was certainly produced.8... 

A related three-component coupling has also been performed with a halide as a nucleophile to lead to ( )- or (Z)-vinyl halides, depending on the conditions and on the substitution of the alkynes [60-62]. Indeed, ( )-vinyl chlorides were preferentially obtained, from a large variety of alkynes and enones, by using CpRuCl(COD) with stannic chloride as a cocatalyst in a polar solvent such as DMF and with ammonium chloride salts [62] (Eq. 45). 

As described in the section Reactions Involving Addition of Water to Alkynes, the reaction of terminal alkynes, water, and a-vinyl ketones afforded 1,5-diketones in DMF-H20 (Eq. 12). Under similar conditions, in the presence of halide, ruthenium-catalyzed three-component coupling of alkyne, an enone, and halide ion formed vinyl halide (Eq. 17) [35]. 

Cyanosilylation of alkynes with Me3SiCN is effectively catalyzed by a PdCl2 complex.263 Its intramolecular version is valuable for the stereo-defined synthesis of tri- and tetrasubstituted alkenes.264 A Pd-catalyzed system effects an efficient three-component coupling of Me3SiCN, highly electron-deficient alkenes, and allyl chlorides (Equation (69))/ 3 The... 

Li and co-workers374,374a reported the three-component coupling reaction of an aldehyde, an amine, and a terminal alkyne catalyzed by a silver salt in water. Of various precatalysts examined, water-insoluble silver iodide gave the highest yields of the propargyl amines 452 (Scheme 137). The reaction probably proceeds via attack of a silver acetylide, generated in situ from the silver salt and the alkyne, to the iminium ion derived from the aldehyde and the... 

---