Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkenylboronic acid preparation

Triflates prepared from (V-alkoxyearbonyl lactams can be coupled with aryl and alkenylboronic acids.227... [Pg.741]

The (E) and (Z) forms of the vinylboron compounds 278 and 279 can be prepared by hydroboration of alkynes and haloalkynes, and their reactions with the (E)- or (Z)-vinyl iodides or bromides 280 and 281 proceed without isomerization the four possible isomers 282-285 can be prepared in high purity. However, for the efficient preparation of the (Z,Z)-dienes 287, the diisopropyl ester of (Z)-alkenylboronic acid 286 should be used. Other boron compounds give poor yields... [Pg.64]

A Prelude Preparation of Haloalkenes and Alkenylboronic Acid Derivatives, Important Building Blocks for Palladium-Mediated C,C Couplings Carbocupration of Alkynes... [Pg.705]

Fig. 16.15. Stereoselective preparations of trans-alkenyl-boronic acid esters (B) and trans-alkenylboronic acids (C) and their stereoselective conversion into c/s-bromoalkenes and trans-iodoalkenes, respectively. Fig. 16.15. Stereoselective preparations of trans-alkenyl-boronic acid esters (B) and trans-alkenylboronic acids (C) and their stereoselective conversion into c/s-bromoalkenes and trans-iodoalkenes, respectively.
Fig. 13.11. Stereoselective preparations of cw-alkenylboronic acids and the corresponding diisopropyl ester starting with cw-bromoalkenes. The first step involves a Br/Li exchange to form the alkenyllithium compound B. This organolithium compound is subsequently transmetallated to give complex C by using B(0 Pr)3. Fig. 13.11. Stereoselective preparations of cw-alkenylboronic acids and the corresponding diisopropyl ester starting with cw-bromoalkenes. The first step involves a Br/Li exchange to form the alkenyllithium compound B. This organolithium compound is subsequently transmetallated to give complex C by using B(0 Pr)3.
Alkenylboronic acids and esters have been prepared by thermal or catalyzed hydroboration of 1-alkynes with catecholborane (HBcat), pinacolborane (HBpin), or dihaloboranes 41-43, followed by hydrolysis to boronic acids or alcoholysis to boronic esters. A convenient alternative to improve chemo- and regioselectivity is the hydroboration of alkynes with dialkylboranes. For selective removal of dummy groups, the oxidation of two cyclohexyl groups was conduced by treatment of l-alkenyl(dicyclohexyl)borane intermediates with Me3N-0 (Equation (7)).116 The... [Pg.151]

The addition of bromine or iodine to ( )-alkenylboronic acids or esters afforded intermediates, which were converted by base into (Z)-l-halo-l-alkenes.543 On the other hand, ( )-iodo-l-alkenes of high stereochemical purity were prepared by treatment of ( )-l-alkenylboronic acids or esters with sodium hydroxide followed by 1 molar equiv. of iodine.544 Iodine monochloride was used in place of iodine for such a base-induced iodination with retention or inversion of the stereochemistry (Equation (110)).545 Chloramine-T/Nal (Equation (111)),546,547 CuX2 (X = Cl, Br) (Equation (112)),548 and iV-halosuccinimides (Equation (113))549 halogenated the C-B bond with retention of stereochemistry. [Pg.189]

Alkenylboronic acids and esters underwent conjugated addition to ct,/ -unsaturated ketones in the presence of trifluoroborane etherate589 or cyanuric fluoride (Equation (129)).590,591 Alkadienyl trifluoromethyl ketones were stereoselectively prepared from (2-alkoxyvinyl) trifluoromethyl ketones (Equation (130)).592 Alkynyl boronates can transfer the alkynyl groups regioselectively and enantioselectively to enones (Equation (131 )).593... [Pg.193]

To avoid the formation of small amounts of the dihydroborated derivatives, it is desirable to use 10% excess of alkyne. Hydrolysis or alcoholysis of the resulting alkenyldichloroborane provides a simple preparation of the desired alkenylboronic acid or esters via hydroboration. [Pg.54]

Bombykol is a well-known pheromone, first isolated from Bombyx mori L. Bombykol the three related isomers were synthesized by cross-coupling reaction. Three alkenylboronates or boronic acids (35 and 36) required for the coupling are prepared by starting from two alkynes. The stereoselective syntheses of ( )- and (Z)-l-alkenylboronic acids or esters have been discussed in Section 2.2.1. Halogenation of alkenylboronic acid 34 with either iodine or bromine provides ( )- and (Z)-haloalkenes [71]. The palladium-and base-assisted coupling of the Cj-boronate 32 or 33 with the C,-halide 35 or 36 stereoselectively provides bombykol and its three geometrical isomers (Scheme 2-29) [72]. [Pg.44]

Interesting compounds, such as cyclopropylboronic acids and esters which are otherwise not easily accessible due to the apparent lack of convenient and versatile syntheses, can now be prepared by simple cyclopropanation with diazomethane. The carbene transfer to substituted and functionalized alkenes also takes place smoothly in the presence of palladium(II) acetate. Several 1-alkenylboronic acid esters 9 were converted to cyclopropylboronic acid esters 10 using this method. ... [Pg.259]

A similar boron-iodine(III) exchange of alkenylboronic acids 303 with iodosylbenzene or (diace-toxyiodo)benzene in the presence of boron trifluoride etherate is an efficient alternative method for a selective preparation of alkenyl(phenyl)iodonium tetrafluoroborates 304 in excellent yields (Scheme 2.87) [440,441],... [Pg.85]

Alkenylboron derivatives are readily available by stereo-defined hydroboration of alkynes and used for the preparation of styrene derivatives by alkenyl-aryl coupling. Vinylboronic acid (81), the most simple alkenylboronic acid, is difficult to handle, because it undergoes uncontrollable polymerization. Its anhydride, 2,4,6-trivinylcyclotriboroxane (82)-pyridine complex, is stable, and can be used conveniently for the coupling. Vinylation of 2-bromoanisole with 82 proceeds in refluxing DME using K2CO3 as a base fo provide 2-vinylanisole (83) [80]. [Pg.304]

We developed several simple routes for the syntheses of pure isomers of CLA. The synthesis via an enyne-substructure (Fig. 3.6) required r-l-bromo-l-heptene [5] and l-(2 -tetrahydropyranyloxy-y)-10-undecyne [2] as building blocks. Cft-l-bromo-1-heptene was prepared by reaction of commercially available 1,3,2-benzodioxaborole with 1-heptyne [3], yielding the 1-alkenylboronic acid ester [4] after heating for 2 h. No solvent was required. The f 2 j-configurated double bond formed during the... [Pg.223]

The ( )-alkenylboronic acids are directly available from 1-alkynes by hydroboration-hydrolysis (eq4). The (2)-isomers are prepared from l-bromo-l-alk3Uies by hydroboration-hydride reduction (eq 5). ... [Pg.190]

Other approaches to trisubstituted aikenes via organoboranes involve alkynyltrialkyl borates, alkenyltrialkyl borates or the cross-coupling reaction of alkenylboronic acids with alkyl halides. Both ( )- and (2)-l,2-disubstituted alkenyl bromides can also be prepared by the methodology shown in eq 7. The boron trifiuoride etherate-mediated 1,4-addition of 1,2-disubstituted alkenylboronates affords y,5-unsaturated ketones (eq 9). The boronates can also be converted into chiral enoiborates for the enantioselective addition to aldehydes. ... [Pg.190]


See other pages where Alkenylboronic acid preparation is mentioned: [Pg.798]    [Pg.615]    [Pg.820]    [Pg.798]    [Pg.615]    [Pg.820]    [Pg.798]    [Pg.186]    [Pg.164]    [Pg.74]    [Pg.614]    [Pg.615]    [Pg.707]    [Pg.711]    [Pg.527]    [Pg.530]    [Pg.33]    [Pg.820]    [Pg.164]    [Pg.37]    [Pg.313]    [Pg.489]    [Pg.287]    [Pg.993]    [Pg.313]    [Pg.50]    [Pg.63]    [Pg.167]    [Pg.473]   
See also in sourсe #XX -- [ Pg.563 ]




SEARCH



1-alkenylboronates

Alkenylboron

Alkenylboronic acid derivative preparation

Alkenylboronic preparation

© 2024 chempedia.info