Alkenes 1,3-dipolar cycloadditions, asymmetric

Scheeren et al. reported the first enantioselective metal-catalyzed 1,3-dipolar cycloaddition reaction of nitrones with alkenes in 1994 [26]. Their approach involved C,N-diphenylnitrone la and ketene acetals 2, in the presence of the amino acid-derived oxazaborolidinones 3 as the catalyst (Scheme 6.8). This type of boron catalyst has been used successfully for asymmetric Diels-Alder reactions [27, 28]. In this reaction the nitrone is activated, according to the inverse electron-demand, for a 1,3-dipolar cycloaddition with the electron-rich alkene. The reaction is thus controlled by the LUMO inone-HOMOaikene interaction. They found that coordination of the nitrone to the boron Lewis acid strongly accelerated the 1,3-dipolar cycloaddition reaction with ketene acetals. The reactions of la with 2a,b, catalyzed by 20 mol% of oxazaborolidinones such as 3a,b were carried out at -78 °C. In some reactions fair enantioselectivities were induced by the catalysts, thus, 4a was obtained with an optical purity of 74% ee, however, in a low yield. The reaction involving 2b gave the C-3, C-4-cis isomer 4b as the only diastereomer of the product with 62% ee. 

The first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction of nitrile oxides with alkenes was reported by Ukaji et al. [76, 77]. Upon treatment of allyl alcohol 45 with diethylzinc and (l ,J )-diisopropyltartrate, followed by the addition of diethylzinc and substituted hydroximoyl chlorides 46, the isoxazolidines 47 are formed with impressive enantioselectivities of up to 96% ee (Scheme 6.33) [76]. 

The reactions of nitrones constitute the absolute majority of metal-catalyzed asymmetric 1,3-dipolar cycloaddition reactions. Boron, aluminum, titanium, copper and palladium catalysts have been tested for the inverse electron-demand 1,3-dipolar cycloaddition reaction of nitrones with electron-rich alkenes. Fair enantioselectivities of up to 79% ee were obtained with oxazaborolidinone catalysts. However, the AlMe-3,3 -Ar-BINOL complexes proved to be superior for reactions of both acyclic and cyclic nitrones and more than >99% ee was obtained in some reactions. The Cu(OTf)2-BOX catalyst was efficient for reactions of the glyoxylate-derived nitrones with vinyl ethers and enantioselectivities of up to 93% ee were obtained. 

The 1,3-dipolar cycloaddition reaction of nitrones with alkenes gives isoxazolidines is a fundamental reaction in organic chemistry and the available literature on this topic of organic chemistry is vast. In this reaction until three contiguous asymmetric centers can be formed in the isoxazolidine 17 as outlined for the reaction between a nitrone and an 1,2-disubstituted alkene. The relative stereochemistry at C-4 and C-5 is always controlled by the geometric relationship of the substituents on the alkene (Scheme 8.6). 

The mechanism of 1,3-dipolar cycloaddition can be found in Ref. 63 and the references within. The reaction of nitrone with 1,2-disubstituted alkenes creates three contiguous asymmetric centers, in which the geometric relationship of the substituents of alkenes is retained. The synthetic utility of nitrone adducts is mainly due to their conversion into various important compounds. For instance, P-amino alcohols can be obtained from isoxazolidines by reduction with H2-Pd or Raney Ni with retention of configuration at the chiral center (Eq. 8.44). 

To control the stereochemistry of 1,3-dipolar cycloaddition reactions, chiral auxiliaries are introduced into either the dipole-part or dipolarophile. A recent monograph covers this topic extensively 70 therefore, only typical examples are presented here. Alkenes employed in asymmetric 1,3-cycloaddition can be divided into three main groups (1) chiral allylic alcohols, (2) chiral amines, and (3) chiral vinyl sulfoxides or vinylphosphine oxides.63c... 

Asymmetric 1,3-dipolar cycloaddition of cyclic nitrones to crotonic acid derivatives bearing chiral auxiliaries in the presence of zinc iodide gives bicyclic isoxazolidines with high stereoselectivity (Eq. 8.51). The products are good precursors of (3-amino acids such as (+)sedridine.73 Many papers concerning 1,3-dipolar cycloaddition of nitrones to chiral alkenes have been reported, and they are well documented (see Ref. 63). 

Copper(II)-bisoxazoline also catalyzes asymmetric 1,3-dipolar cycloaddition reactions of nitrones with electron-rich alkenes (Eq. 8.57).90... 

As discussed in Section 6.2, nitro compounds are good precursors of nitrile oxides, which are important dipoles in cycloadditions. The 1,3-dipolar cycloaddition of nitrile oxides with alkenes or alkynes provides a straightforward access to 2-isoxazolines or isoxazoles, respectively. A number of ring-cleaving procedures are applicable, such that various types of compounds may be obtained from the primary adducts (Scheme 8.18). There are many reports on synthetic applications of this reaction. The methods for generation of nitrile oxides and their reactions are discussed in Section 6.2. Recent synthetic applications and asymmetric synthesis using 1,3-dipolar cycloaddition of nitrile oxides are summarized in this section. 

Asymmetric 1,3-dipolar cycloaddition of nitronates using chiral alkenes has been reported,... 

However, most asymmetric 1,3-dipolar cycloaddition reactions of nitrile oxides with alkenes are carried out without Lewis acids as catalysts using either chiral alkenes or chiral auxiliary compounds (with achiral alkenes). Diverse chiral alkenes are in use, such as camphor-derived chiral N-acryloylhydrazide (195), C2-symmetric l,3-diacryloyl-2,2-dimethyl-4,5-diphenylimidazolidine, chiral 3-acryloyl-2,2-dimethyl-4-phenyloxazolidine (196, 197), sugar-based ethenyl ethers (198), acrylic esters (199, 200), C-bonded vinyl-substituted sugar (201), chirally modified vinylboronic ester derived from D-( + )-mannitol (202), (l/ )-menthyl vinyl ether (203), chiral derivatives of vinylacetic acid (204), ( )-l-ethoxy-3-fluoroalkyl-3-hydroxy-4-(4-methylphenylsulfinyl)but-1 -enes (205), enantiopure Y-oxygenated-a,P-unsaturated phenyl sulfones (206), chiral (a-oxyallyl)silanes (207), and (S )-but-3-ene-1,2-diol derivatives (208). As a chiral auxiliary, diisopropyl (i ,i )-tartrate (209, 210) has been very popular. 

An interesting antibody-catalyzed intermolecular asymmetric 1,3-dipolar cycloaddition reaction between 4-acetamidobenzonitrile N-oxide and N,N-dimethylacrylamide generating the corresponding 5-acylisoxazoline was observed (216). Reversed regioselectivity of nitrile oxide cycloaddition to a terminal alkene was reported in the reaction of 4-A rt-butylbenzonitrile oxide with 6A-acrylamido-6A-deoxy-p-cyclodextrin in aqueous solution, leading to the formation of the 4-substituted isoxazoline, in contrast to the predominance of the 5-substituted regioisomer from reactions of monosubstituted alkenes (217). 

Dipolarophiles D5. Electron-deficient alkenes based on acrolein and its analogs are widely used as dipolarophiles. To carry out asymmetrical 1,3-dipolar cycloadditions between various nitrones and acrolein, the bis-titanium catalyst (543) (Fig. 2.37) was used as the chiral Lewis acid (Table 2.22) (754a). 

The use of chiral azomethine imines in asymmetric 1,3-dipolar cycloadditions with alkenes is limited. In the first example of this reaction, chiral azomethine imines were applied for the stereoselective synthesis of C-nucleosides (100-102). Recent work by Hus son and co-workers (103) showed the application of the chiral template 66 for the formation of a new enantiopure azomethine imine (Scheme 12.23). This template is very similar to the azomethine ylide precursor 52 described in Scheme 12.19. In the presence of benzaldehyde at elevated temperature, the azomethine imine 67 is formed. 1,3-Dipole 67 was subjected to reactions with a series of electron-deficient alkenes and alkynes and the reactions proceeded in several cases with very high selectivities. Most interestingly, it was also demonstrated that the azomethine imine underwent reaction with the electronically neutral 1-octene as shown in Scheme 12.23. Although a long reaction time was required, compound 68 was obtained as the only detectable regio- and diastereomer in 50% yield. This pioneering work demonstrates that there are several opportunities for the development of new highly selective reactions of azomethine imines (103). 

The 1,3-dipolar cycloadditions of 1,3-dipoles with chiral alkenes has been extensively reviewed and thus only selected examples will be highlighted here. We have chosen to divide this section on the basis of the different types of alkenes rather than on the basis of the type of 1,3-dipole. For 1,3-dipolar cycloadditions, as well as for other reactions, it is important that the chiral center intended to control the stereoselectivity of the reaction is located as close as possible to the functional group of the molecule at which the reaction takes place. Hence, alkenes bearing the chiral center vicinal to the double bond are most frequently apphed in asymmetric 1,3-dipolar cycloadditions. Examples of the application of alkenes with the chiral center localized two or more bonds apart from the alkene will also be mentioned. Application of chiral auxiliaries for alkenes is very common and will be described separately in Section 12.3. 

Chiral alkenes derived from ot,p-unsaturated aldehydes have also been applied in asymmetric 1,3-dipolar cycloadditions (142). Soucy et al. (142) used (—)-8-(benzylamino)menthol (94) and acrolein for the exclusive formation of 95 having an equatorial C(2) vinyl group (Scheme 12.31). The 1,3-dipolar cycloaddition of acetonitrile oxide with 95 gave 96 with a selectivity of > 90% de. 

Chiral exocyclic alkenes such as 112, also having the chiral center two bonds away from the reacting alkene moiety, have been used in highly diastereoselective reactions with azomethine ylides, and have been used as the key reaction for the asymmetric synthesis of (5)-(—)-cucurbitine (Scheme 12.37) (169). The aryl sulfone 113 was used in a 1,3-dipolar cycloaddition reaction with acyclic nitrones. In 113, the chiral center is located four bonds apart from alkene, and as a result, only moderate diastereoselectivities of 36-56% de were obtained in these reactions (170). 

The development and application of catalytic enantioselective 1,3-dipolar cycloadditions is a relatively new area. Compared to the broad application of asymmetric catalysis in carbo- and hetero-Diels-Alder reactions (337,338), which has evolved since the mid-1980s, the use of enantioselective metal catalysts in asymmetric 1,3-dipolar cycloadditions remained almost unexplored until 1993 (5). In particular, the asymmetric metal-catalyzed reactions of nitrones with alkenes has received considerable attention during the past 5 years. 

Many other groups further studied the utility of bis(oxazolines) including Ikeda s use of biaryl bis(oxazolines) such as 250 (Fig. 9.75) in the zinc-catalyzed asymmetric alkylation of benzaldehyde with diethylzinc. " This reaction proceeded in yields up to 92% with ee up to 88%. Kodama and co-workers used a biaryl bis(oxazoline) ligand, namely, [l,l -]binaphthalenyl-2,2 -diol (BlNOL)-box 251, in the lanthanide-catalyzed asymmetric 1,3-dipolar cycloaddition of nitrones to alkenes. ... 

A practicable strategy to provide access to chiral pyrazolidine-3-carboxylic acid (16) makes use of asymmetric dipolar cycloaddition of diazoalkanes to u,p-unsaturated carboxylic acid derivatives. For this purpose a chiral auxiliary of the alkene component is used, e.g. Op-polzer s1166 1671 (lf )-2,10-camphorsultam.t164l As shown in Scheme 7, by reaction of (tri-methylsilyl)diazomethane (41) with /V-( aery I oy I )cam p h ors u 11 am (42), the AL(4,5-dihy-dropyrazoline-5-carbonyl)camphorsultam (43) is obtained. Reduction of 44 with sodium cyanoborohydride leads to A-(pyrazolidine-3-carbonyl)camphorsultam (45) as the 35-dia-stereoisomer (ee 9 1) in 65 to 80% yields.[164] The camphorsultam 45 is then converted into the methyl ester 46 by reaction with magnesium methylate without racemizationj1641... 

The use of TiCl2-TADD0Late and Mg(II)-phenanthroline catalysts in asymmetric 1,3-dipolar cycloadditions of alkenes with nitrones has been reviewed.62 The 1,3-dipolar cycloaddition of 3-acryloyloxazolidin-2-one with nitrones catalysed by [TiX2(TADDOLato)] complex shows high regio-, diastereo-, and enantio-selectivity.63... 

---