Alcohols coil coating

Coil Coating Phosphates, Solvesso, Cyclohexanol, Alcohols, Carbitols, Hydrocarbons... 

Chem. Descrip. Linear CjC, alcohol phthalate CAS 68515-42-4 EINECS/ELINCS 271-084-6 Uses Plasticizer for PVC for imitation leather, elec, cables, conveyor belts, coil coatings, profiles, gaskets, tubing Features Enhanced low temp, performance low fogging UV stable Properties Hazen 50 max. clear liq. pract. odorless sol. in common org. soivs. misc. with most of the plasticizers used in processing PVC insol. in water dens. 0.965-0.978 ml (20 C) vise. 43-51 mPa-s-(20 C) acid no. 0.07 max. ref. index 1.480-1.486 (20 C) 99.5% min. ester content 0.1% max. water Diplast 0 [LonzaSpA]... 

Chem. Descrip. Diethylene glycol monobutyl ether acetate CAS 124-17-4 EINECS/ELINCS 204-685-9 Uses Solvent in cosmetics, printing inks, high-bake enamels, esp. screen inks and coil coatings selective solvent in separation of alcohols and ketone coalescing aid in low-pH latex paints Features Very slow evaporation rate limited water sol. 

Chem. Desap. Phthalic acid ester consisting of C7-11 alcohols Uses Plasticizer for plasticized PVC prods, with low brittle temps., for profiles, imitation leather and coil coatings, esp. for plastisols Features Lowvolatilily Palatinol A [BASF AG]... 

Uses Solvent in coil, container, and automotive coatings, printing inks, acrylic lacquers, enamels, surf, primers for epoxies and polyesters, paint strippers, foundry core binders, resin cleanup, intermediates, industrial cleaners, wire enamel resins Features Offers VOC compliance, noncorrosive Regulatory DOT nonregulated SARA 302, 313 nonreportable Properties APHA 50 max. sweet odor sol. in alcohols, esters, glycol ethers, halogenated soivs., ketones, hydrocarbons sol. 5.5% in water m.w. 160 sp.gr. 1.086 dens. 9.06 Ib/gal vise. 3.88 cps f.p. -40.2 C b.p. 200-220 C acid no. 0.1 flash pt. (PMCC) 102 C surf. tens. 35.4 dynes/ cm 0.1% max. water content... 

Pastes are stored in mildly agitated stainless steel (304 L, 316 L) tanks. Polyester resins form suitable tank coatings when only mild steel tanks are available. Copper and its alloys may cause discolouration of the product and should be avoided. Temperatures below 15 should be avoided and therefore heating coils with warm water (40°C) are required. Ehiring storage, solutions of alcohol ether sulphate often tend to become acidic due to hydrolysis. Ways to prevent this have been described in section 6.5.3. and 6.6.4., storage and handling of primary alcohol sulphates. 

---