Agglomerates, description

Characterization. The proper characterization of coUoids depends on the purposes for which the information is sought because the total description would be an enormous task (27). The foUowiag physical traits are among those to be considered size, shape, and morphology of the primary particles surface area number and size distribution of pores degree of crystallinity and polycrystaUinity defect concentration nature of internal and surface stresses and state of agglomeration (27). Chemical and phase composition are needed for complete characterization, including data on the purity of the bulk phase and the nature and quaHty of adsorbed surface films or impurities. 

The major consumer of tantalum is the capacitor production industry. About 60% of the total amount of tantalum currently produced is in the form of fine, agglomerated high purity powder of capacitor grade. Tantalum capacitors have high volumetric efficiency and reliability. A basic description of tantalum capacitor technology is presented in overview [19]. 

With the development of new instrumental techniques, much new information on the size and shape of aqueous micelles has become available. The inceptive description of the micelle as a spherical agglomerate of 20-100 monomers, 12-30 in radius (JJ, with a liquid hydrocarbon interior, has been considerably refined in recent years by spectroscopic (e.g. nmr, fluorescence decay, quasielastic light-scattering), hydrodynamic (e.g. viscometry, centrifugation) and classical light-scattering and osmometry studies. From these investigations have developed plausible descriptions of the thermodynamic and kinetic states of micellar micro-environments, as well as an appreciation of the plurality of micelle size and shape. 

Kapur and Fuerstenau (K5) have presented a unified description of the agglomeration process in which the phenomena of the compaction of the agglomerates and their passage through the various capillary regimes have... 

A schematic of a typical fuel-cell catalyst layer is shown in Figure 9, where the electrochemical reactions occur at the two-phase interface between the electrocatalyst (in the electronically conducting phase) and the electrolyte (i.e., membrane). Although a three-phase interface between gas, electrolyte, and electrocatalyst has been proposed as the reaction site, it is now not believed to be as plausible as the two-phase interface, with the gas species dissolved in the electrolyte. This idea is backed up by various experimental evidence, such as microscopy, and a detailed description is beyond the scope of this review. Experimental evidence also supports the picture in Figure 9 of an agglomerate-type structure where the electrocatalyst is supported on a carbon clump and is covered by a thin layer of membrane. Sometimes a layer of liquid water is assumed to exist on top of the membrane layer, and this is discussed in section 4.4.6. Figure 9 is an idealized picture, and... 

Besides the numerical calculation of shape factors, there are also qualitative descriptions of shape. For example, certain pharmacopoeias define shapes such as an agglomerate, needle, etc. Since no one method is best in all applications, the best method for determining particle shape depends on the application and nature of the particle being examined. 

---