Aerosol isolation suite

Fig. 7 illustrates the use of facility design, equipment design, and personnel protection. The picture is taken from an aerosol isolation suite where the manufacturing process is performed in a totally enclosed system... 

Fig. 7 Aerosol isolation suite where manufacture takes place in a totally enclosed system with clean-in-place capability. The operator is gowned in a washable suit and is wearing a powered-air-purifying respirator.

Fig. 3 shows a pilot plant layout with restricted personnel access. This design would support the development and clinical manufacture of solid dosage forms, liquids, semisolids, aerosols, and sterile products. Multipurpose rooms are incorporated in each area to maximize the use of portable equipment, and scale factors similar to those shown in Table 1 are employed. Isolation suites are indicated in the manufacturing area their purpose and design are discussed in more detail later. The sterile area is isolated from the main corridor by the interior corridor design. At the far left, the main corridor provides access for future facility expansion, if necessary. 

---