Adiabatic continuous flow stirred tank reactors

Fig ure 6-22. Temperature versus conversion for a first order irreversible reaction in an adiabatic continuous flow stirred tank reactor. 

Consider an exothermic irreversible reaction with first order kinetics in an adiabatic continuous flow stirred tank reactor. It is possible to determine the stable operating temperatures and conversions by combining both the mass and energy balance equations. For the mass balance equation at constant density and steady state condition,... 

FINDING REQUIRED VOLUME FOR AN ADIABATIC CONTINUOUS-FLOW STIRRED-TANK REACTOR 5.6... 

ILLUSTRATION 10.3 Adiabatic Operation of a Cascade of Continuous Flow Stirred-Tank Reactors... 

Knowledge of these types of reactors is important because some industrial reactors approach the idealized types or may be simulated by a number of ideal reactors. In this chapter, we will review the above reactors and their applications in the chemical process industries. Additionally, multiphase reactors such as the fixed and fluidized beds are reviewed. In Chapter 5, the numerical method of analysis will be used to model the concentration-time profiles of various reactions in a batch reactor, and provide sizing of the batch, semi-batch, continuous flow stirred tank, and plug flow reactors for both isothermal and adiabatic conditions. 

The reactor system may consist of a number of reactors which can be continuous stirred tank reactors, plug flow reactors, or any representation between the two above extremes, and they may operate isothermally, adiabatically or nonisothermally. The separation system depending on the reactor system effluent may involve only liquid separation, only vapor separation or both liquid and vapor separation schemes. The liquid separation scheme may include flash units, distillation columns or trains of distillation columns, extraction units, or crystallization units. If distillation is employed, then we may have simple sharp columns, nonsharp columns, or even single complex distillation columns and complex column sequences. Also, depending on the reactor effluent characteristics, extractive distillation, azeotropic distillation, or reactive distillation may be employed. The vapor separation scheme may involve absorption columns, adsorption units,... 

While the adiabatic batch reactor is important and presents many control issues in its own right, we are concerned here primarily with continuous systems. We consider in detail two distinct reactor types the continuous stirred tank reactor (CSTRj and the plug-flow reactor. They differ fundamentally in the way the reactants and the products... 

There are a variety of limiting forms of equation 8.0.3 that are appropriate for use with different types of reactors and different modes of operation. For stirred tanks the reactor contents are uniform in temperature and composition throughout, and it is possible to write the energy balance over the entire reactor. In the case of a batch reactor, only the first two terms need be retained. For continuous flow systems operating at steady state, the accumulation term disappears. For adiabatic operation in the absence of shaft work effects the energy transfer term is omitted. For the case of semibatch operation it may be necessary to retain all four terms. For tubular flow reactors neither the composition nor the temperature need be independent of position, and the energy balance must be written on a differential element of reactor volume. The resultant differential equation must then be solved in conjunction with the differential equation describing the material balance on the differential element. 

---