Addition of Carbonates

These easily-made carbonates have become useful intermediates for (i) the direct synthesis of cyclic carbonates via the Heck reaction [82] (ii) optically active carbonates by enantioselective hydrogenation [83] and (iii) to oxazolidinones [84, 85] as an alternative route to the Evans reagent [86-88]. 

---

Addition of Carbon, Oxygen, Nitrogen, and Sulfur Nucleophiles... 

Often the aldehyde is hydrogenated to the corresponding alcohol. In general, addition of carbon monoxide to a substrate is referred to as carbonylation, but when the substrate is an olefin it is also known as hydroformylation. The eady work on the 0x0 synthesis was done with cobalt hydrocarbonyl complexes, but in 1976 a low pressure rhodium-cataly2ed process was commerciali2ed that gave greater selectivity to linear aldehydes and fewer coproducts. 

If the gas has the correct composition, the carbon content at the surface increases to the saturation value, ie, the solubiUty limit of carbon in austenite (Fig. 2), which is a function of temperature. Continued addition of carbon to the surface increases the carbon content curve. The surface content is maintained at this saturation value (9) (Fig. 5). The gas carburizing process is controlled by three factors (/) the thermodynamics of the gas reactions which determine the equiUbrium carbon content at the surface (2) the kinetics of the chemical reactions which deposit the carbon and (J) the diffusion of carbon into the austenite. 

Without other alternatives, the carboxyalkyl radicals couple to form dibasic acids HOOC(CH)2 COOH. In addition, the carboxyalkyl radical can be used for other desired radical reactions, eg, hydrogen abstraction, vinyl monomer polymerization, addition of carbon monoxide, etc. The reactions of this radical with chloride and cyanide ions are used to produce amino acids and lactams employed in the manufacture of polyamides, eg, nylon. 

Selectivity of propylene oxide from propylene has been reported as high as 97% (222). Use of a gas cathode where oxygen is the gas, reduces required voltage and eliminates the formation of hydrogen (223). Addition of carbonate and bicarbonate salts to the electrolyte enhances ceU performance and product selectivity (224). Reference 225 shows that use of alternating current results in reduced current efficiencies, especiaHy as the frequency is increased. Electrochemical epoxidation of propylene is also accompHshed by using anolyte-containing silver—pyridine complexes (226) or thallium acetate complexes (227,228). 

Second Carbonation. Calcium is reduced to the practical minimum by the addition of carbon dioxide at a OH of 4.5 at a temperature of as near to 100°C as possible. This is the maximum temperature in the purification process and the retention time is only long enough to effect the OH... 

Use of alcohol as a solvent for carbonylation with reduced Pd catalysts gives vinyl esters. A variety of acrylamides can be made through oxidative addition of carbon monoxide [630-08-0] CO, and various amines to vinyl chloride in the presence of phosphine complexes of Pd or other precious metals as catalyst (14). 

One patent describes a continuous process involving an aqueous alkah metal hydroxide, carbon disulfide, and an alcohol (82). The reported reaction time is 0.5—10 min before the mixture is fed to the dryer. The usual residence time is on the order of hours. A study ia the former USSR reported the use of the water—alcohol azeotrope for water removal from isobutyl or isoamyl alcohol and the appropriate alkah hydroxide to form the alkoxide prior to the addition of carbon disulfide (83). 

Mechanical properties depend on the alloying elements. Addition of carbon to the cobalt base metal is the most effective. The carbon forms various carbide phases with the cobalt and the other alloying elements (see Carbides). The presence of carbide particles is controlled in part by such alloying elements such as chromium, nickel, titanium, manganese, tungsten, and molybdenum that are added during melting. The distribution of the carbide particles is controlled by heat treatment of the solidified alloy. 

Other options for the purification of CA include dissolution in hot water, aqueous ammonia, aqueous formaldehyde, or hot dimethylformamide followed by filtration to remove most of the impurities. The CA is recoverable by cooling the aqueous solution (84), acidifying the ammonium hydroxide solution (85), or cooling the dimethylform amide solution with further precipitation of CA by addition of carbon tetrachloride (86). Sodium hydroxide addition precipitates monosodium cyanurate from the formaldehyde solution (87). 

Ethylene carbonate (l,3-dioxolan-2-one) is commercially prepared from ethylene oxide by the addition of carbon dioxide to ethylene oxide with either ammonium or alkaU metal salts as catalysts (87) ... 

Photolysis of a mixture of furan and benzene gives mainly the [4 + 4] cycloadduct (141) a substantial amount of the adduct (142) derived by addition of carbons 2 and 5 of furan and 1 and 3 of benzene is also obtained (81JOC2674. ... 

A large flask is used to contain the vigorous effervescence that occurs upon the addition of carbonate. The final pH should be near 7.5, and it is reached after the addition of bicarbonate on longer causes bubbling. 

The addition of carbon nucleophile, including organometallic compounds, enolates, or enols, and ylides to carbonyl gro is an important method of formation of carbon-carbon bonds. Such reactions are- ctremely important in synthesis and will be discussed extensively in Part B. Here, we will examine some of the fundamental mechanistic aspects of addition of carbon nucleophiles to carbonyl groups. 

SECTION 8.3. ADDITION OF CARBON NUCLEOPHILES TO CARBONYL GROUPS... 

One of the older preparative free-radical reactions is the addition of polyhalomethanes to alkenes. Examples of addition of carbon tetrabromide, carbon tetrachloride, and bromoform have been recorded. The reactions are chain processes that depend on facile abstraction of halogen or hydrogen from the halomethane ... 

For additions of carbon radicals to carbonyl functions, cf. also Reusch. ... 

Addition of carbon and fluorine can also be initiated by elettraphilic attack on a/luorinated otefin under strongly acidic conditions [250, 251, 252,253 254 255] Best known are fluoroalkylations ot tetrafluoroethylene by tertiary or highly halogenated allylic or benzylic cations in the presence of antimony pentafluoride (equation 53)... 

From the reactions of sulfur and carbon disulfide with cyclic ketone-derived enamines (570-573) 3H-l,2-dithiole-3-thiones were obtained, whereas the addition of carbon disulfide to other enamines gave a-dithio-pyrones (574), through initial dimerization of the enamine. 

---