Acyl enol esters

Shibata and coworkers extended their enantioselective a-fluorination works [53, 54] to catalytic version using cinchona alkaloids-Selectfluor combination (Scheme 6.33) [61]. Acyl enol esters 110 were employed as substrates in the presence of 112 with Selectfluor and sodium acetate in CH2C12 to afford a-fluoroketones 111 (up to 53% ee). 

Hydrolysis of Enol Esters. Enzyme-mediated enantioface-differentiating hydrolysis of enol esters is an original method for generating optically active a-substituted ketones (84—86). If the protonation of a double bond occurs from one side with the simultaneous elimination of the acyl group (Fig. 3), then the optically active ketone should be produced. Indeed, the incubation of l-acetoxy-2-methylcyclohexene [1196-73-2] (68) with Pichia... 

Enol esters are another useful family of acylating agents. The acetate of the enol form of acetone, isopropenyl acetate, is the most commonly used member of this group of... 

The active acylating agent is presumably the C-protonated enol ester... 

In their original communication on the alkylation and acylation of enamines, Stork et al. (3) had reported that the pyrrolidine enamine of cyclohexanone underwent monoacylation with acid chlorides. For example, the acylation with benzoyl chloride led to monobenzoylcyclohexanone. However, Hunig and Lendle (33) found that treatment of the morpholine enamine of cyclopentanone with 2 moles of propionyl chloride followed by acid hydrolysis gave the enol ester (56), which was proposed to have arisen from the intermediate (55). 

The acylation of enamino ketones can take place on oxygen or on carbon. While reaction at nitrogen is a possibility, the N-acylated products are themselves acylating agents, and further reaction normally takes place. The first reported acylation of enamino ketones (72) was that of 129, prepared by acylation of the enamine (113), which was shown to have undergone O acylation because on mild hydrolysis the enol ester (130) could be isolated. A similar reaction took place with other aliphatic acid chlorides (80) and with dibasic acid chlorides [e.g., with succinyl chloride to give 118 above]. 

The smooth conversion of the enol acetate (151) into an A -acyl derivative (152) under extremely mild conditions points to the high acylating capacity of these esters. This cleavage of isoxazolium salts is also caused by other anions of carboxylic acids, and thus they can be readily converted to reactive enol esters. A very convenient and specific synthesis of peptides due to Woodward et is based on... 

Due to the nonaromatic character of the oxepin system the oxepinones do not usually form stable enol structures. By O-acylation or O-alkylation, however, the enol forms can be stabilized as enol esters and ethers, respectively. A large number of substituted 1-benzoxepins have been synthesized by this route. Acetylation of l-benzoxepin-3(2//)-ones 1 and l-benzoxepin-5(2/T)-ones 3 was readily achieved with acetic anhydride in the presence of an appropriate base such as pyridine, triethylamine or sodium acetate.t5,t6 t72 176... 

The reaction between acyl halides and alcohols or phenols is the best general method for the preparation of carboxylic esters. It is believed to proceed by a 8 2 mechanism. As with 10-8, the mechanism can be S l or tetrahedral. Pyridine catalyzes the reaction by the nucleophilic catalysis route (see 10-9). The reaction is of wide scope, and many functional groups do not interfere. A base is frequently added to combine with the HX formed. When aqueous alkali is used, this is called the Schotten-Baumann procedure, but pyridine is also frequently used. Both R and R may be primary, secondary, or tertiary alkyl or aryl. Enolic esters can also be prepared by this method, though C-acylation competes in these cases. In difficult cases, especially with hindered acids or tertiary R, the alkoxide can be used instead of the alcohol. Activated alumina has also been used as a catalyst, for tertiary R. Thallium salts of phenols give very high yields of phenolic esters. Phase-transfer catalysis has been used for hindered phenols. Zinc has been used to couple... 

Hence, enol esters such as isopropenyl acetate are good acylating agents for alcohols. Isopropenyl acetate can also be used to convert other ketones to the corresponding enol acetates in an exchange reaction ... 

Triple bonds can give enol esters or acylals when treated with carboxylic acids. Mercuric salts are usually catalysts, and vinylic mercury compounds... 

In a related reaction, enolate 71 is undergoing an electrophilic chlorination with 2,2,6,6-tetrachloro-cyclohexanone (74, Fig. 39), eventually leading to a-chlorinated enol esters 75 [91]. However, a different mechanism cannot be completely ruled out, where the catalyst is not acylated by the ketene, but chlorinated by the tetrachloro-ketone to form [64c-Cl] as the reactive species. 

Scheme 2.15. Acylation of Ester Enolates with Acyl Halides, Anhydrides, and Imidazolides... 

Acyl imidazolides are more reactive than esters but not as reactive as acyl halides. Entry 7 is an example of formation of a (3-ketoesters by reaction of magnesium enolate monoalkyl malonate ester by an imidazolide. Acyl imidazolides also are used for acylation of ester enolates and nitromethane anion, as illustrated by Entries 8, 9, and 10. (V-Methoxy-lV-methylamides are also useful for acylation of ester enolates. 

The enolates of ketones can be acylated by esters and other acylating agents. The products of these reactions are [Tdicarbonyl compounds, which are rather acidic and can be alkylated by the procedures described in Section 1.2. Reaction of ketone enolates with formate esters gives a P-ketoaldehyde. As these compounds exist in the enol form, they are referred to as hydroxymethylene derivatives. Entries 1 and 2 in Scheme 2.16 are examples. Product formation is under thermodynamic control so the structure of the product can be predicted on the basis of the stability of the various possible product anions. 

These reactions accomplish the same overall synthetic transformation as the acylation of ester enolates, but use desulfurization rather than decarboxylation to remove the anion-stabilizing group. Dimethyl sulfone can be subjected to similar reaction sequences.232... 

In lipase-catalyzed transesterifications, frequent use of enol esters as acyl agents has been seen [1, 5], since the leaving unsaturated alcohol irreversibly tautomerizes to an aldehyde or a ketone, leading to the desired product in high yields. The polymerization of divinyl adipate and 1,4-butanediol proceeded in the presence of lipase PF at 45 °C [39]. Under similar reaction conditions, adipic acid and diethyl adipate did not afford the polymeric materials, indicating the high polymerizability of bis(enol ester) toward lipase catalyst. 

This novel resin-bound CHD derivative was then utilized in the preparation of an amide library under microwave irradiation. Reaction of the starting resin-bound CHD with an acyl or aroyl chloride yields an enol ester, which, upon treatment with amines, leads to the corresponding amide, thus regenerating the CHD. This demonstrates the feasibility of using the CHD resin as a capture and release reagent for the synthesis of amides. The resin capture/release methodology [126] aids in the removal of impurities and facilitates product purification. 

Hydrogenation of N-Acyl Enamides, Enol Esters and Enol Carbamates... 

Electrolytic reduction, apparatus, 52, 23 Enol acetates, acylation of, 52,1 Enol esters, preparation, 52, 39 Epichlorohydrin, with boron trifluoride diethyl therate and dimethyl ether to give trimethyloxonium tetra-fluoroborate, 51,142 ESTERIFICATION OF HINDERED ALCOHOLS f-BUTYL p-TOLUATE,... 

Overview of the Databank. A profile of the Phase I databank of compounds is presented in Tables II-IV 202 of the 2652 permutations possible from 12 dione moieties, 13 aryl substitution patterns, and 17 different enol ester acyl groups constituted the Phase I dataset. The structures and data given below exemplify how activity varied with structure throughout the dataset. 

Another important part of Organic 11 is carbonyl chemistry. We look at the basics of the carbonyls in Chapter 9. It s like a family reunion where 1 (John, one of your authors) grew up in North Carolina — everybody is related. You meet aldehydes, ketones, carboxylic acids, acyl chlorides, esters, cimides, and on and on. It s a quick peek, because later we go back and examine many of these in detail. For example, in Chapter 10 you study aldehydes and ketones, along with some of the amines, while in Chapter 11 we introduce you to other carbonyl compounds, enols and enolates, along with nitroalkanes and nitriles. 

Acylation of ester enolates can also be carried out with more reactive acylating agents such as acid anhydrides and acyl chlorides. These reactions must be done in inert solvents to avoid solvolysis of the acylating agent. The preparation of diethyl benzoylmalonate (entry 1 in Scheme 2.14) is an example employing an acid anhydride. Entries 2-5 illustrate the use of acyl chlorides. Acylations with these more reactive compounds can be complicated by competing O-acylation. /V-Mcthoxy-iV-methylamidcs are also useful for acylation of ester enolates. 

Acyl imidazolides have also been used for acylation of ester enolates and nitromethane anion, as illustrated by entries 9 and 10 in Scheme 2.14. 

---